ADXL375 datasheet(25/32 Pages) AD

номер детали	ADXL375

подробное описание детали	3-Axis, 200 g Digital Accelerometer

PDF	32 Pages

Scroll/Zoom	100%

производитель	AD [Analog Devices]

домашняя страница	http://www.analog.com

Logo

25 / 32 page

Data Sheet

ADXL375

Rev. 0 | Page 25 of 32

FIFO_TRIG

Entries

The read-only FIFO_STATUS register indicates whether a

trigger event has occurred and reports the number of data

values stored in the FIFO buffer.

FIFO_TRIG Bit

When the FIFO_TRIG bit is set to 1, a trigger event has occurred;

when the FIFO_TRIG bit is set to 0, no trigger event has occurred.

Entries Bits

The entries bits report how many data values are stored in the

FIFO buffer. The data stored in the FIFO buffer is accessed by

reading the data registers (Address 0x32 to Address 0x37). FIFO

reads must be done in burst mode (multiple-byte mode) because

each FIFO level is cleared after any read (single- or multiple-

byte) of the FIFO buffer. The FIFO buffer stores a maximum of

32 entries, which equates to a maximum of 33 entries available

at any given time because an additional entry is available at the

output filter of the device.

ADXL375 датащи(PDF) 25 Page - Analog Devices