SST25VF080B datasheet(16/32 Pages) SST

16 / 32 page

Data Sheet

8 Mbit SPI Serial Flash

SST25VF080B

S71296-04-000

01/10

Chip-Erase

The Chip-Erase instruction clears all bits in the device to

FFH. A Chip-Erase instruction will be ignored if any of the

memory area is protected. Prior to any Write operation, the

Write-Enable (WREN) instruction must be executed. CE#

must remain active low for the duration of the Chip-Erase

instruction sequence. The Chip-Erase instruction is initiated

by executing an 8-bit command, 60H or C7H. CE# must be

driven high before the instruction is executed. The user may

poll the Busy bit in the software status register or wait TCE

for the completion of the internal self-timed Chip-Erase

cycle. See Figure 15 for the Chip-Erase sequence.

FIGURE 15: Chip-Erase Sequence

Read-Status-Register (RDSR)

The Read-Status-Register (RDSR) instruction allows read-

ing of the status register. The status register may be read at

any time even during a Write (Program/Erase) operation.

When a Write operation is in progress, the Busy bit may be

checked before sending any new commands to assure that

the new commands are properly received by the device.

CE# must be driven low before the RDSR instruction is

entered and remain low until the status data is read. Read-

Status-Register is continuous with ongoing clock cycles

until it is terminated by a low to high transition of the CE#.

See Figure 16 for the RDSR instruction sequence.

FIGURE 16: Read-Status-Register (RDSR) Sequence

CE#

SCK

01 2 3 4 5 6 7

60 or C7

HIGH IMPEDANCE

MODE 0

MODE 3

1296 ChEr.0

MSB

1296 RDSRseq.0

MODE 3

SCK

CE#

Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0

MODE 0

HIGH IMPEDANCE

Status

MSB

SST25VF080B датащи(PDF) 16 Page - Silicon Storage Technology, Inc

SST25VF080B датащи(HTML) 16 Page - Silicon Storage Technology, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

датащи скачать

ссылки URL