SPC5702BECLU datasheet(43/98 Pages) FREESCALE

43 / 98 page

Electrical Characteristics

MPC560xS Microcontroller Data Sheet Data Sheet, Rev. 1

Preliminary—Subject to Change Without Notice

Freescale Semiconductor

VSS12

CC Voltage on VSS12 pin with respect to VSS

VSS-0.1

VSS+0.1

VDD

6,7

SR Voltage on VDD pins (VDDE_A, VDDE_B,

VDDE_C, VDDE_E, VDDMA, VDDMB, VDDMC)

with respect to ground (VSS)

Voltage drop2

+4.5

+5.5

VSS

SR I/O supply ground

VDDE_A

SR Voltage on VDDE_A (I/O supply) pin with respect

to ground (VSSE_A)

+4.5

+5.5

VDDE_B

SR Voltage on VDDE_B (I/O supply) pin with respect

to ground (VSSE_B)

+4.5

+5.5

VDDE_C

SR Voltage on VDDE_C (I/O supply) pin with respect

to ground (VSSE_C)

+4.5

+5.5

VDDE_E

SR Voltage on VDDE_E (I/O supply) pin with respect

to ground (VSSE_E)

+4.5

+5.5

VDDMA

SR Voltage on VDDMA (stepper motor supply) pin

with respect to ground (VSSMA)

+4.5

+5.5

VDDMB

SR Voltage on VDDMB (stepper motor supply) pin

with respect to ground (VSSMB)

+4.5

+5.5

VDDMC

SR Voltage on VDDMC (stepper motor supply) pin

with respect to ground (VSSMC)

+4.5

+5.5

VSSOSC

SR Voltage on VSSOSC (oscillator ground) pin with

respect to VSS

VLCD

SR Voltage on VLCD (LCD supply) pin with respect to

VSS

0VDDE_A +0.3

TVDD

SR VDD slope to ensure correct power up

0.25

V/µs

SR Ambient temperature under bias

-40

+105

°C

-40

+105

SR Junction temperature under bias

-40

+150

1 100 nF capacitance needs to be provided between V

DDA/VSSA pair.

2 Full functionality cannot be guaranteed when voltage drops below 4.5 V. In particular, I/O DC and ADC electrical

characteristics may not be guaranteed below 4.5 V during the voltage drop sequence.

3 200

μF capacitance must be connected between V

DDR and VSS12.

4 V

DD12 cannot be used to drive any external component.

5 Each V

DD12/VSS12 supply pair should have a 10 μF capacitor. Absolute combined maximum capacitance is 40 μF.

6 V

DD refers collectively to I/O voltage supplies, i.e., VDDE_A, VDDE_B, VDDE_C, VDDE_E, VDDMA, VDDMB and VDDMC.

7 100 nF capacitance needs to be provided between each V

DD/VSS pair

8 V

SS refers collectively to I/O voltage supply grounds, i.e., VSSE_A, VSSE_B, VSSE_C, VSSE_E, VSSMA, VSSMB and

VSSMC) unless otherwise noted.

9 V

DDE_C should not be less than VDDA.

10 Guaranteed by device validation

Table 10. Recommended Operating Conditions (5.0 V) (continued)

Symbol

Parameter

Conditions

Value

Unit

Min

Max

SPC5702BECLU датащи(PDF) 43 Page - Freescale Semiconductor, Inc

SPC5702BECLU датащи(HTML) 43 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98

датащи скачать

ссылки URL