MPC5510 datasheet(20/54 Pages) FREESCALE

20 / 54 page

MPC5510 Microcontroller Family Data Sheet, Rev. 2

Preliminary—Subject to Change Without Notice

Electrical Characteristics

Freescale Semiconductor

Electrical Characteristics

This section contains detailed information on power considerations, DC/AC electrical characteristics, and AC timing

specifications for the MCU.

2.1

Maximum Ratings

Table 3. Absolute Maximum Ratings1

1 Functional operating conditions are given in the DC electrical specifications. Absolute maximum ratings are stress ratings only,

and functional operation at the maxima is not guaranteed. Stress beyond the listed maxima may affect device reliability or

cause permanent damage to the device.

Num

Characteristic

Symbol

Min

Max2

2 Absolute maximum voltages are currently maximum burn–in voltages. Absolute maximum specifications for device stress have

not yet been determined.

Unit

5.0V Voltage Regulator Reference Voltage

VDDR

– 0.3

6.5

5.0V Analog Supply Voltage (reference to VSSA)VDDA

– 0.3

6.5

5.0V Flash Program/Erase Voltage

VPP

– 0.3

6.5

3.3V – 5.0V External I/O Supply Voltage 3

3 All functional non-supply I/O pins are clamped to V

SS and VDDE.

VDDE1

VDDE2

VDDE3

4 V

DDE1, VDDE2, and VDDE3 are separate power segments and may be powered independently with no differential voltage

constraints between the power segments.

– 0.3

6.5

DC Input Voltage 5

5 AC signal over and undershoot of the input voltages of up to +/– 2.0 volts is permitted for a cumulative duration of 60 hours

over the complete lifetime of the device (injection current does not need to be limited for this duration).

VIN

–1.06

6 Internal structures will hold the input voltage above -1.0 volt if the injection current limit of 2mA is met.

6.57

7 Internal structures hold the input voltage below this maximum voltage on all pads powered by V

DDE supplies, if the maximum

injection current specification is met (2 mA for all pins) and VDDE is within Operating Voltage specifications.

6VREF Differential Voltage

VRH – VRL

– 0.3

5.5

7VRH to VDDA Differential Voltage

VRH – VDDA

– 5.5

5.5

8VRL to VSSA Differential Voltage

VRL – VSSA

– 0.3

0.3

9VDDR to VDDA Differential Voltage

VDDR – VDDA

– VDDA

0.3

Maximum DC Digital Input Current 8 (per pin, applies to all

digital MH, SH, and IH pins)

8 Total injection current for all pins (including both digital and analog) must not exceed 25mA.

IMAXD

–2

Maximum DC Analog Input Current 9 (per pin, applies to all

analog AE and A pins)

9 Total injection current for all analog input pins must not exceed 15mA.

IMAXA

–3

Storage Temperature Range

TSTG

– 55.0

150.0

Maximum Solder Temperature 10

10 Solder profile per CDF-AEC-Q100.

TSDR

—

260.0

Moisture Sensitivity Level 11

11 Moisture sensitivity per JEDEC test method A112.

MSL

—

MPC5510 датащи(PDF) 20 Page - Freescale Semiconductor, Inc

MPC5510 датащи(HTML) 20 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

датащи скачать

ссылки URL