| поискавой системы для электроныых деталей |
|
H8S2245 датащи(PDF) 118 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
H8S2245 датащи(HTML) 118 Page - Renesas Technology Corp |
|
118 / 818 page ![]() Section 3 MCU Operating Modes Rev.3.00 Mar. 26, 2007 Page 76 of 772 REJ09B0355-0300 3.3.4 Mode 4 The CPU can access a 16-Mbyte address space in advanced mode. The on-chip ROM is disabled. Pins P1 3 to P10, and ports A, B, and C function as an address bus, ports D and E function as a data bus, and part of port F carries bus control signals. Pins P1 3 to P10 function as input ports immediately after a reset. They can each be set to output address use by setting the corresponding bits in the data direction register (DDR) to 1. The initial bus mode after a reset is 16 bits, with 16-bit access to all areas. However, note that if 8- bit access is designated by the bus controller for all areas, the bus mode switches to 8 bits. 3.3.5 Mode 5 The CPU can access a 16-Mbyte address space in advanced mode. The on-chip ROM is disabled. Pins P1 3 to P10, and ports A, B, and C function as an address bus, ports D functions as a data bus, and part of port F carries bus control signals. Pins P1 3 to P10 function as input ports immediately after a reset. They can each be set to output address use by setting the corresponding bits in the data direction register (DDR) to 1. The initial bus mode after a reset is 8 bits, with 8-bit access to all areas. However, note that if at least one area is designated for 16-bit access by the bus controller, the bus mode switches to 16 bits and port E becomes a data bus. 3.3.6 Mode 6 The CPU can access a 16-Mbyte address space in advanced mode. The on-chip ROM is enabled. Pins P1 3 to P10, and ports A, B, and C function as input ports immediately after a reset. They can each be set to output addresses by setting the corresponding bits in the data direction register (DDR) to 1. Port D functions as a data bus, and part of port F carries bus control signals. The initial bus mode after a reset is 8 bits, with 8-bit access to all areas. However, note that if at least one area is designated for 16-bit access by the bus controller, the bus mode switches to 16 bits and port E becomes a data bus. Note: Mode 6 cannot be used in the H8S/2240. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |