 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
M306V2EEFS датащи(PDF) 133 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M306V2EEFS датащи(HTML) 133 Page - Renesas Technology Corp |
|
|
133 / 271 page  Rev.1.40 Oct 06, 2004 page 133 of 269 M306V2ME-XXXFP, M306V2EEFP (2) I2Ci data shift register, I2Ci transmit buffer register (i = 0, 1) The I2Ci data shift register is an 8-bit shift register to store receive data and write transmit data. When transmit data is written into this register, it is transferred to the outside from bit 7 in synchroniza- tion with the SCL clock, and each time one-bit data is output, the data of this register are shifted one bit to the left. When data is received, it is input to this register from bit 0 in synchronization with the SCL clock, and each time one-bit data is input, the data of this register are shifted one bit to the left. The I2Ci data shift register is in a write enable status only when the ESO bit of the I2Ci control register is “1.” The bit counter is reset by a write instruction to the I2Ci data shift register. When both the ESO bit and the MST bit of the I2Ci status register are “1,” the SCL is output by a write instruction to the I2Ci data shift register. Reading data from the I2Ci data shift register is always enabled regardless of the ESO bit value. The I2Ci transmit buffer register is a register to store transmit data (slave address) to the I2Ci data shift register before RESTART condition generation. That is, in master, transmit data written to the I2Ci transmit buffer register is written to the I2Ci data shift register simultaneously. However, the SCL is not output. The I2Ci transmit buffer register can be written only when the ESO bit is “1,” reading data from the I2Ci transmit buffer register is disabled regardless of the ESO bit value. Notes 1: To write data into the I2Ci data shift register or the I2Ci transmit buffer register after the MST bit value changes from “1” to “0” (slave mode), keep an interval of 20 BCLK or more. 2: To generate START/RESTART condition after the I2Ci data shift register or the I2Ci transmit buffer register is written, keep an interval of 2 BCLK or more. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
