S7G2 datasheet(39/117 Pages) RENESAS

39 / 117 page

R01DS0262EU0150 Rev.1.50

Page 39 of 117

Sep 24, 2025

S7G2 Datasheet

2. Electrical Characteristics

Note 1. This is the value when low driving ability is selected in the port drive capability bit in the PmnPFS register. The

selected driving ability is retained in Deep Software Standby mode.

Note 2. This is the value when middle driving ability is selected in the port drive capability bit in the PmnPFS register. The

selected driving ability is retained in Deep Software Standby mode.

Note 3. This is the value when high driving ability is selected in the port drive capability bit in the PmnPFS register. When

the following ports are configured for high driving ability, they shift to middle driving ability during Deep Software

Standby mode: P203 to P207, P407 to P415, P602, P708 to P713, P813, PA12 to PA15, PB01.

Note 4. Except for P000 to P007, P200, which are input ports.

Caution:

To protect the reliability of the MCU, the output current values should not exceed the values in the

preceding table. The average output current indicates the average value of current measured during

100 μs.

2.2.4

I/O VOH, VOL, and Other Characteristics

Note 1. SCL0_A, SDA0_A (total 2 pins).

Note 2. This is the value when high driving ability is selected in the Port Drive Capability bit in the PmnPFS register. Even

when high driving ability is selected, IOH and IOL shift to middle driving ability during Deep Software Standby

mode.

When medium or low driving ability is selected, refer to the values of other output pins.

Permissible output current

(max value total pins)

Maximum of all output pins

ΣIOH (max)

---80

ΣIOL (max)

--80

Table 2.6

I/O VOH, VOL, and other characteristics

Parameter

Symbol

Min

Typ

Max

Unit

Test conditions

Output voltage

IIC

VOL

0.4

IOL = 3.0 mA

VOL

0.6

IOL = 6.0 mA

IIC

VOL

0.4

IOL = 15.0 mA

(ICFER.FMPE = 1)

VOL

-0.4

IOL = 20.0 mA

(ICFER.FMPE = 1)

ETHERC

VOH

VCC - 0.5

IOH = -1.0 mA

VOL

0.4

IOL = 1.0 mA

Ports P205, P206, P407 to P415,

P602, P708 to P713, P813, PA12 to

PA15, PB01 (total 24 pins)

VOH

VCC - 1.0

IOH = -20 mA

VCC = 3.3 V

VOL

1.0

IOL = 20 mA

VCC = 3.3 V

Other output pins

VOH

VCC - 0.5

IOH = -1.0 mA

VOL

0.5

IOL = 1.0 mA

Input leakage current

RES

|Iin|-

5.0

μAVin = 0 V

Vin = 5.5 V

Ports P000 to P007, P200

1.0

Vin = 0 V

Vin = VCC

Three-state leakage

current (off state)

5V-tolerant ports

|ITSI|-

5.0

μAVin = 0 V

Vin = 5.5 V

Other ports (except for ports P000

to P007, P200)

1.0

Vin = 0 V

Vin = VCC

Input pull-up MOS current

Ports P0 to PB (except for ports

P000 to P007)

-300

-10

μA

VCC = 2.7 to 3.6 V

Vin = 0 V

Input capacitance

USB_DP, USB_DM, and ports

P003, P007, P014, P015,P400,

P415, P401, P511, P512

Cin

Vbias = 0V

Vamp = 20mV

f = 1 MHz

Ta = 25°C

Other input pins

Table 2.5

I/O IOH, IOL (2 of 2)

Parameter

Symbol

Min

Typ

Max

Unit

S7G2 датащи(PDF) 39 Page - Renesas Technology Corp

S7G2 датащи(HTML) 39 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL