PIC16F631 datasheet(178/294 Pages) MICROCHIP

178 / 294 page

PIC16F631/677/685/687/689/690

DS41262D-page 176

SSPSTAT: SYNC SERIAL PORT STATUS REGISTER(1)

R/W-0

R-0

SMP

CKE

D/A

R/W

bit 7

bit 0

Legend:

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as ‘0’

-n = Value at POR

‘1’ = Bit is set

‘0’ = Bit is cleared

x = Bit is unknown

bit 7

SMP: SPI Data Input Sample Phase bit

SPI Master mode:

= Input data sampled at end of data output time

= Input data sampled at middle of data output time (Microwire)

SPI Slave mode:

SMP must be cleared when SPI is used in Slave mode

I2C™ mode:

This bit must be maintained clear

bit 6

CKE: SPI Clock Edge Select bit

SPI mode, CKP = 0:

= Data transmitted on rising edge of SCK (Microwire alternate)

= Data transmitted on falling edge of SCK

SPI mode, CKP = 1:

= Data transmitted on falling edge of SCK (Microwire default)

= Data transmitted on rising edge of SCK

I2C mode:

This bit must be maintained clear

bit 5

D/A: DATA/ADDRESS bit (I2C mode only)

= Indicates that the last byte received or transmitted was data

= Indicates that the last byte received or transmitted was address

bit 4

P: Stop bit (I2C mode only)

This bit is cleared when the SSP module is disabled, or when the Start bit is detected last.

SSPEN is cleared.

= Indicates that a Stop bit has been detected last (this bit is ‘0’ on Reset)

= Stop bit was not detected last

bit 3

S: Start bit (I2C mode only)

This bit is cleared when the SSP module is disabled, or when the Stop bit is detected last.

SSPEN is cleared.

= Indicates that a Start bit has been detected last (this bit is ‘0’ on Reset)

= Start bit was not detected last

bit 2

R/W: READ/WRITE bit Information (I2C mode only)

This bit holds the R/W bit information following the last address match. This bit is only valid from the address match

to the next Start bit, Stop bit or ACK bit.

= Read

= Write

bit 1

UA: Update Address bit (10-bit I2C mode only)

= Indicates that the user needs to update the address in the SSPADD register

= Address does not need to be updated

bit 0

BF: Buffer Full Status bit

Receive (SPI and I2C modes):

= Receive complete, SSPBUF is full

= Receive not complete, SSPBUF is empty

Transmit (I2C mode only):

= Transmit in progress, SSPBUF is full

= Transmit complete, SSPBUF is empty

Note

PIC16F687/PIC16F689/PIC16F690 only.

PIC16F631 датащи(PDF) 178 Page - Microchip Technology

PIC16F631 датащи(HTML) 178 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL