DP83848C_07 datasheet(49/82 Pages) NSC

49 / 82 page

www.national.com

7.2 Extended Registers

7.2.1 PHY Status Register (PHYSTS)

This register provides a single location within the register set for quick access to commonly accessed information.

Table 21. PHY Status Register (PHYSTS), address 0x10

Bit

Bit Name

Default

Description

RESERVED

0, RO

RESERVED: Write ignored, read as 0.

MDI-X mode

0, RO

MDI-X mode as reported by the Auto-Negotiation logic:

This bit will be affected by the settings of the MDIX_EN and

FORCE_MDIX bits in the PHYCR register. When MDIX is en-

abled, but not forced, this bit will update dynamically as the

Auto-MDIX algorithm swaps between MDI and MDI-X configu-

rations.

1 = MDI pairs swapped

(Receive on TPTD pair, Transmit on TPRD pair)

0 = MDI pairs normal

(Receive on TRD pair, Transmit on TPTD pair)

Receive Error Latch

0, RO/LH

Receive Error Latch:

This bit will be cleared upon a read of the RECR register.

1 = Receive error event has occurred since last read of RXERCNT

(address 0x15, Page 0).

0 = No receive error event has occurred.

Polarity Status

0, RO

Polarity Status:

This bit is a duplication of bit 4 in the 10BTSCR register. This bit will

be cleared upon a read of the 10BTSCR register, but not upon a

read of the PHYSTS register.

1 = Inverted Polarity detected.

0 = Correct Polarity detected.

False Carrier Sense

Latch

0, RO/LH

False Carrier Sense Latch:

This bit will be cleared upon a read of the FCSR register.

1 = False Carrier event has occurred since last read of FCSCR (ad-

dress 0x14).

0 = No False Carrier event has occurred.

Signal Detect

0, RO/LL

100Base-TX unconditional Signal Detect from PMD.

Descrambler Lock

0, RO/LL

100Base-TX Descrambler Lock from PMD.

Page Received

0, RO

Link Code Word Page Received:

This is a duplicate of the Page Received bit in the ANER register,

but this bit will not be cleared upon a read of the PHYSTS register.

1 = A new Link Code Word Page has been received. Cleared on

read of the ANER (address 0x06, bit 1).

0 = Link Code Word Page has not been received.

MII Interrupt

0, RO

MII Interrupt Pending:

1 = Indicates that an internal interrupt is pending. Interrupt source

can be determined by reading the MISR Register (0x12h). Reading

the MISR will clear the Interrupt.

0= No interrupt pending.

Remote Fault

0, RO

Remote Fault:

1 = Remote Fault condition detected (cleared on read of BMSR (ad-

dress 01h) register or by reset). Fault criteria: notification from Link

Partner of Remote Fault via Auto-Negotiation.

0 = No remote fault condition detected.

DP83848C датащи(PDF) 49 Page - National Semiconductor (TI)

DP83848C датащи(HTML) 49 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82

датащи скачать

ссылки URL