AM29LV640MT100REF datasheet(44/66 Pages) AMD

44 / 66 page

Am29LV640MT/B

26190C8 February 1, 2007

D A TA

SH EE T

ABSOLUTE MAXIMUM RATINGS

Storage Temperature

Plastic Packages . . . . . . . . . . . . . . . –65

°C to +150°C

Ambient Temperature

with Power Applied. . . . . . . . . . . . . . –65

°C to +125°C

Voltage with Respect to Ground

CC (Note 1) . . . . . . . . . . . . . . . . . –0.5 V to +4.0 V

IO . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to +4.0 V

A9, OE#, ACC, and RESET#

(Note 2) . . . . . . . . . . . . . . . . . . . . –0.5 V to +12.5 V

All other pins (Note 1) . . . . . . –0.5 V to V

CC +0.5 V

Output Short Circuit Current (Note 3) . . . . . . 200 mA

Notes:

1. Minimum DC voltage on input or I/O pins is –0.5 V.

Dur ing voltage transitions, input or I/O pins can

overshoot V

SS to –2.0 V for per iods of up to 20 ns.

Maximum DC voltage on input or I/O pins is VCC +0.5 V.

See Figure 10. During voltage transitions, input or I/O

pins can overshoot to V

CC +2.0 V for periods up to 20 ns.

See Figure 11.

2. Minimum DC input voltage on pins A9, OE#, ACC, and

RESET# is –0.5 V. During voltage transitions, A9, OE#,

ACC, and RESET# can overshoot V

SS to –2.0 V for

periods of up to 20 ns. See Figure 10. Maximum DC

input voltage on pin A9, OE#, ACC, and RESET# is

+12.5 V which can overshoot to +14.0 V for periods up to

20 ns.

3. No more than one output can be shorted to ground at a

time. Duration of the short circuit should not be greater

than one second.

Stresses above those listed under “Absolute Maximum

Ratings” can cause permanent damage to the device. This is

a stress rating only; functional operation of the device at

these or any other conditions above those indicated in the

operational sections of this data sheet is not implied.

Exposure of the device to absolute maximum rating

conditions for extended periods can affect device reliability.

OPERATING RANGES

Industrial (I) Devices

Ambient Temperature (T

A) . . . . . . . . . –40°C to +85°C

Supply Voltages

CC for full voltage range . . . . . . . . . . . . . . . 2.7–3.6 V

CC for regulated voltage range . . . . . . . . . . 3.0–3.6 V

Note: Operating ranges define those limits between which

the functionality of the device is guaranteed.

20 ns

+0.8 V

–0.5 V

20 ns

–2.0 V

Figure 10.

Maximum Negative

Overshoot Waveform

20 ns

VCC

+2.0 V

VCC

+0.5 V

20 ns

2.0 V

Figure 11.

Maximum Positive

Overshoot Waveform

AM29LV640MT100REF датащи(PDF) 44 Page - Advanced Micro Devices

AM29LV640MT100REF датащи(HTML) 44 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

датащи скачать

ссылки URL