| поискавой системы для электроныых деталей |
|
BL702/704/706 датащи(PDF) 17 Page - Bouffalo Lab Intelligent Technology Co., Ltd. |
|
|
|||||||||||||||||||||||||||||
BL702/704/706 датащи(HTML) 17 Page - Bouffalo Lab Intelligent Technology Co., Ltd. |
|
17 / 47 page ![]() BL702/704/706 Datasheet 2.10.11 QDEC The chip has built-in three sets of quadrature decoders, which are used to decode the two sets of pulses with a phase difference of 90 degrees generated by the dual-channel rotary encoder into the corresponding speed and rotation. Direction. QDEC clock source can be 32K (f32k_clk) or 32M (xclk), with 16-bit pulse count range (-32768~32767 pulse/sample), with 12 configurable sample periods (32us~131ms per sample at 1MHz) ), with a 16-bit settable report period (0~65535 ample/report). 2.10.12 ADC The chip has a built-in 12bits successive approximation analog-to-digital converter (ADC) with a maximum working clock of 2MHz, supports 12 external analog inputs and several internal analog signal selections, and supports single- channel conversion and multi-channel scanning modes. ADC can work in two modes of single conversion and multi-channel scanning. It supports 2.0V, 3.2V optional internal reference voltage, and the conversion result is 12/14/16bits (achieved by oversampling) left-justified mode. The ADC has a FIFO with a depth of 32, supports a variety of interrupts, and supports DMA operations. In addition to measuring common analog signals, ADC can also be used to measure power supply voltage. In addition, ADC can also be used for temperature detection by measuring internal/external diode voltage. 2.10.13 DAC The chip has a built-in 10bits digital-to-analog converter (DAC) with a FIFO depth of 1 word and supports 2 DAC modulation outputs. Can be used for audio playback, conventional analog signal modulation, DAC input clock can be selected as 32M or Audio PLL, support DMA to transfer memory to the DAC modulation register, DAC output pin is fixed to ChannelA to GPIO11, ChannelB to GPIO17. 2.10.14 Debug interface Support standard JTAG 4-wire debugging interface, and use debuggers such as Jlink/OpenOCD/CK Link for debug- ging. BL702/704/706 Datasheet 17/ 47 @2021 Bouffalo Lab |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |