MC68340 datasheet(98/441 Pages) FREESCALE

98 / 441 page

MOTOROLA

MC68340 USER’S MANUAL

4- 1

SECTION 4

SYSTEM INTEGRATION MODULE

The MC68340 system integration module (SIM40) consists of several functions that

control the system start-up, initialization, configuration, and the external bus with a

minimum of external devices. It also provides the IEEE 1149.1 boundary scan capabilities.

The SIM40 includes the following functions:

• System Configuration and Protection

• Clock Synthesizer

• Chip Selects and Wait States

• External Bus Interface

• Bus Arbitration

• Dynamic Bus Sizing

• IEEE 1149.1 Test Access Port

4.1 MODULE OVERVIEW

The SIM40 is essentially identical to the SIM implemented in the MC68330. The SIM40

has similar features to the SIM in the MC68331, MC68332, and MC68333. The periodic

interrupt timer, double bus fault monitor, software watchdog, internal bus monitor, and

spurious interrupt monitor are identical. However, many of the other features in the SIM's

differ in their use and details.

The system configuration and protection function controls system configuration and

provides various monitors and timers, including the internal bus monitor, double bus fault

monitor, spurious interrupt monitor, software watchdog timer, and the periodic interrupt

timer.

The clock synthesizer generates the clock signals used by the SIM40 and the other on-

chip modules, as well as CLKOUT used by external devices.

The programmable chip select function provides four chip select signals that can enable

external memory and peripheral circuits, providing all handshaking and timing signals.

Each chip select signal has an associated base address register and an address mask

states can be programmed by setting bits in the address mask register.

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

MC68340 датащи(PDF) 98 Page - Freescale Semiconductor, Inc