CS5920 datasheet(145/160 Pages) AMCC

145 / 160 page

S5920 – PCI Product

Revision 1.01 – November 28, 2005

AMCC Confidential and Proprietary

DS1596

145

Data Book

PCI Signal DC Characteristics

The following table summarizes the DC characteristic parameters for all PCI signals listed below as they apply to

the S5920.

AD[31:0] (t/s), PAR (t/s), C/BE[3:0]# (in), FRAME# (in), IRDY# (in), TRDY# (s/t/s), STOP# (s/t/s), LOCK# (in),

IDSEL (in), DEVSEL# (s/t/s), PERR# (s/t/s), SERR# (o/d), INTA# (o/d), RST# (in), CLK (in).

Notes:

1. Recommended values for all PCI signals except CLK to be Vih = 2.4 Min and Vil = .4 Max.

2. Input leakage applies to all inputs and bi-directional buffers.

3. PCI bus signals without pull-up resistors will provide the 3 mA output current. Signals which require a pull-up resistor will provide 6 mA output

current.

4. The PCI specification limits all PCI inputs not located on the motherboard to 10 pF (the clock is allowed to be 12 pF).

Table 61. PCI Signal DC Characteristics (V CC = 5.0V 5%, 0 0 C to 70 0 C, 50 pF load on outputs)

Symbol

Parameter

Min

Max

Units

Test Conditions

Notes

VIH

Input High Voltage

2.0

Volts

VIL

Input Low Voltage

-0.5

0.8

Volts

LIH

Input High Leakage Current

VIN = 2.7

LIL

Input Low Leakage Current

-70

VIN = 0.5

VOH

Output High Voltage

2.4

Volts

IOUT = -2 mA

VOL

Output Low Voltage

0.55

Volts

IOUT = 3 mA, 6 mA

CIN

Input Pin Capacitance

CCLK

CLK Pin Capacitance

CIDSEL

IDSEL Pin Capacitance

CS5920 датащи(PDF) 145 Page - Applied Micro Circuits Corporation

CS5920 датащи(HTML) 145 Page - Applied Micro Circuits Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL