COM90C66 datasheet(32/76 Pages) SMSC

32 / 76 page

of a dual two-level FIFO, commands to be

transmitted and received, as well as the status

bits, are pipelined.

In order for the COM90C66 to be compatible with

previous SMSC ARCNET devices, the device

defaults to the non-chaining mode. In order to

take advantage of the Command Chaining

operation, the Command Chaining Mode must be

enabled via a logic "1" on bit 6 of the

Configuration Register.

The following is a list of Command Chaining

guidelines for the software programmer to follow.

Further detail can be found in the Transmit

Command Chaining and Receive Command

Chaining sections of this document.

• The device is designed such that the

interrupt service routine latency does not

affect performance.

The first interrupt

maybe serviced prior to the generation of the

second interrupt.

• Up to two outstanding transmissions and two

outstanding receptions can be pending at

any given time.

The commands may be

given in any order.

• Up to two outstanding transmit interrupts

and two outstanding receive interrupts are

stored by the device, along with their

respective status bits.

• The Interrupt Mask bits act on TTA (Rising

Transition

Transmitter

Available)

for

transmit

operations

and

TRI

(Rising

Transition of Receiver Inhibited) for receive

operations. TTA is set upon completion of a

packet reception only. Typically there is no

need to mask the TTA and TRI bits after

clearing the interrupt.

• The traditional TA and RI bits are still

available to reflect the present status of the

device.

In Command Chaining, the Status Register looks

as follows:

POR

TEST

RECON

TMA

TTA

TMA

TTA

TRI

COM90C66 датащи(PDF) 32 Page - SMSC Corporation

COM90C66 датащи(HTML) 32 Page - SMSC Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76

датащи скачать

ссылки URL