CC3235MODASF datasheet(75/100 Pages) TI1

75 / 100 page

CC3235MODAS, CC3235MODASF

www.ti.com

SWRS233 – OCTOBER 2019

Submit Documentation Feedback

Product Folder Links: CC3235MODAS CC3235MODASF

Detailed Description

Table 6-5. CC3235MODAx Functional Configurations (continued)

NAME

SOP[2]

SOP[1]

SOP[0]

SoP MODE

COMMENT

RET_FACTORY_IMAGE

Pulldown

Pullup

RetFactDef

When module reset is toggled, the MCU

bootloader kickstarts the procedure to

restore factory default images.

6.12 Hostless Mode

The SimpleLink™ Wi-Fi® CC3235MODAx devices incorporate a scripting ability that enables offloading of

simple tasks from the host processor. Using simple and conditional scripts, repetitive tasks can be

handled internally, which allows the host processor to remain in a low-power state. In some cases where

the scripter is being used to send packets, it reduces code footprint and memory consumption. The if-this-

then-that style conditioning can include anything from GPIO toggling to transmitting packets.

The conditional scripting abilities can be divided into conditions and actions. The conditions define when to

trigger actions. Only one action can be defined per condition, but multiple instances of the same condition

may be used, so in effect multiple actions can be defined for a single condition. In total, 16 condition and

action pairs can be defined. The conditions can be simple, or complex using sub-conditions (using a

combinatorial AND condition between them). The actions are divided into two types, those that can occur

during runtime and those that can occur only during the initialization phase.

The following actions can only be performed when triggered by the pre-initialization condition:

•

Set roles AP, station, P2P, and Tag modes

•

Delete all stored profiles

•

Set connection policy

•

Hardware GPIO indication allows an I/O to be driven directly from the WLAN core hardware to indicate

internal signaling

The following actions may be activated during runtime:

•

Send transceiver packet

•

Send UDP packet

•

Send TCP packet

•

Increment counter increments one of the user counters by 1

•

Set counter allows setting a specific value to a counter

•

Timer control

•

Set GPIO allows GPIO output from the device using the internal networking core

•

Enter Hibernate state

NOTE

Consider the following limitations:

•

Timing cannot be ensured when using the network scripter because some variable

latency will apply depending on the utilization of the networking core.

•

The scripter is limited to 16 pairs of conditions and reactions.

•

Both timers and counters are limited to 8 instances each. Timers are limited to a

resolution of 1 second. Counters are 32 bits wide.

•

Packet length is limited to the size of one packet and the number of possible packet

tokens is limited to 8.

CC3235MODASF датащи(PDF) 75 Page - Texas Instruments

CC3235MODASF датащи(HTML) 75 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

датащи скачать

ссылки URL