| поискавой системы для электроныых деталей |
|
CC3235MODASF датащи(PDF) 41 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
CC3235MODASF датащи(HTML) 41 Page - Texas Instruments |
|
41 / 100 page ![]() TX power level setting 19.00 17.00 15.00 13.00 11.00 9.00 7.00 5.00 3.00 1.00 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 280.00 264.40 249.00 233.30 218.00 202.00 186.70 171.00 155.60 140.00 1 DSSS Color by TX Power (dBm) IBAT (VBAT @ 3.6 V) 41 CC3235MODAS, CC3235MODASF www.ti.com SWRS233 – OCTOBER 2019 Submit Documentation Feedback Product Folder Links: CC3235MODAS CC3235MODASF Specifications Copyright © 2019, Texas Instruments Incorporated (1) The back-off range is between -6 dB to +6 dB in 0.25dB increments. (2) FCC, IC/ISED, ETSI/CE, SRRC, and MIC are supported. (3) Back-off rates are grouped into 11b rates, high modulation rates (MCS7, 54 OFDM and 48 OFDM), and lower modulation rates (all other rates). (4) Please also note that there will be a delta between the CC3135MOD and CC3135 IC's TX power levels. 5.6 TX Power Control for 2.4 GHz Band The CC3235MODAS has several options for modifying the output power of the device when required. For the 2.4 GHz band it is possible to lower the overall output power at a global level using the global TX power level setting. In addition, the 2.4 GHz band allows the user to enter additional back-offs (1), per channel, region (2) and modulation rates (3) (4), via Image creator (see the Uniflash with Image Creator User Guide for more details). Figure 5-1, Figure 5-2, and Figure 5-3 show TX Power and IBAT versus TX power level settings for the CC3235MODS module at modulations of 1 DSSS, 6 OFDM, and 54 OFDM, respectively. For the CC3235MODSF module, the IBAT current has an increase of approximately 10 mA to 15 mA depending on the transmitted rate. The TX power level will remain the same. In Figure 5-1, the area enclosed in the circle represents a significant reduction in current during transition from TX power level 3 to level 4. In the case of lower range requirements (14-dBm output power), TI recommends using TX power level 4 to reduce the current. Figure 5-1. TX Power and IBAT vs TX Power Level Settings (1 DSSS) |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |