 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
ADATE320 датащи(PDF) 18 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADATE320 датащи(HTML) 18 Page - Analog Devices |
|
|
18 / 83 page  Data Sheet ADATE320 Rev. B | Page 17 of 82 Parameter Min Typ Max Unit Test Level Test Conditions/Comments Gain Error, Current Clamps (PCHx/PCLx) 0 30 % P All ranges; PPMU force ±1.0 V into 0.0 V2 Gain TC, Current Clamps (PCHx/PCLx) ±50 ppm/°C CT All ranges INL, Current Clamps (PCHx/PCLx) −0.15 +0.15 %FSR P All ranges; PPMU force ±1.0 V into 0.0 V, after two-point gain/offset calibration; PCHx calibration at DAC Code 0xA000 (3.75 V or 50% FS) and DAC Code 0xB333 (4.50 V or 80% FS); PCLx calibration at DAC Code 0x6000 (1.25 V or −50% FS) and DAC Code 0x4CCC (0.50 V or −80% FS); measured over dc accuracy range Current Droop Low Current Clamp (PCLx), Sink −2 +2 %FSR P PCLx = 0.5 V (−80% FS), PCHx = 4.5 V (80% FS), PPMU force −0.5 V and +3.5 V into VDUTx = 4.5 V, measure ∆I at the DUTx pin in Range A High Current Clamp (PCHx), Source −2 +2 %FSR P PCLx = 0.5 V (−80% FS), PCHx = 4.5 V (80% FS), PPMU force −0.5 V and +3.5 V into VDUTx = −1.5 V, measure ∆I at the DUTx pin in Range A SETTLING/SWITCHING TIMES FV Settling Time to 0.1% of Final Value Range A, 200 pF and 2000 pF Load 20 µs S PPMU enabled in FV, Range A, step from 0.0 V to 4.0 V Range B, 200 pF and 2000 pF Load 25 µs S PPMU enabled in FV, Range B, DCL disabled, step from 0.0 V to 4.0 V Range C, 200 pF Load 25 µs S PPMU enabled in FV, Range C, DCL disabled, step from 0.0 V to 4.0 V Range C, 2000 pF Load 65 µs S PPMU enabled in FV, Range C, DCL disabled, step from 0.0 V to 4.0 V FV Settling Time to 1.0% of Final Value Range A, 200 pF and 2000 pF Load 16 µs CB PPMU enabled in FV, Range A, DCL disabled, step from 0.0 V to 4.0 V Range B, 200 pF and 2000 pF Load 14 µs CB PPMU enabled in FV, Range B, DCL disabled, step from 0.0 V to 4.0 V Range C, 200 pF and 2000 pF Load 18 µs CB PPMU enabled in FV, Range C, DCL disabled enabled, step from 0.0 V to 4.0 V FI Settling Time to 0.1% of Final Value Range A, 200 pF in Parallel with 120 Ω 16 µs S PPMU enabled in FI, Range A, DCL disabled, step from 0.0 mA to 40 mA Range B, 200 pF in Parallel with 1.5 kΩ 10 µs S PPMU enabled in FI, Range B, DCL disabled, step from 0.0 mA to 1 mA Range C, 200 pF in Parallel with 15.0 kΩ 40 µs S PPMU enabled in FI, Range C, DCL disabled, step from 0.0 mA to 100 µA FI Settling Time to 1.0% of Final Value Range A, 200 pF in Parallel with 120 Ω 8 µs CB PPMU enabled in FI, Range A, DCL disabled, step from 0.0 mA to 40 mA Range B, 200 pF in Parallel with 1.5 kΩ 8 µs CB PPMU enabled in FI, Range B, DCL disabled, step from 0.0 mA to 1 mA Range C, 200 pF in Parallel with 15.0 kΩ 8 µs CB PMU enabled in FI, Range C, DCL disabled, step from 0.0 mA to 100 µA |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
