| поискавой системы для электроныых деталей |
|
LPC2131 датащи(PDF) 20 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
LPC2131 датащи(HTML) 20 Page - NXP Semiconductors |
|
20 / 41 page ![]() 9397 750 14868 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Preliminary data sheet Rev. 02 — 15 April 2005 20 of 41 Philips Semiconductors LPC2131/2132/2134/2136/2138 Single-chip 16/32-bit microcontrollers 6.10 General purpose parallel I/O Device pins that are not connected to a specific peripheral function are controlled by the GPIO registers. Pins may be dynamically configured as inputs or outputs. Separate registers allow setting or clearing any number of outputs simultaneously. The value of the output register may be read back, as well as the current state of the port pins. 6.10.1 Features • Direction control of individual bits. • Separate control of output set and clear. • All I/O default to inputs after reset. 6.11 10-bit A/D converter The LPC2131/32 contain one and the LPC2134/2136/2138 contains two analog to digital converters. These converters are single 10-bit successive approximation analog to digital converters with eight multiplexed channels. 6.11.1 Features • Measurement range of 0 V to 3.3 V. • Each converter capable of performing more than 400,000 10-bit samples per second. • Burst conversion mode for single or multiple inputs. • Optional conversion on transition on input pin or Timer Match signal. • Global Start command for both converters (LPC2134/2136/2138 only). 6.12 10-bit D/A converter This peripheral is available in the LPC2132/2134/2136/2138 only. The D/A converter enables the LPC2132/2134/2136/2138 to generate variable analog output. 6.12.1 Features • 10 bit digital to analog converter. • Buffered output. • Power-down mode available. • Selectable speed versus power. Table 8: Pin function select register 2 (PINSEL2 - 0xE002C014) PINSEL2 bits Description Reset value 1:0 Reserved - 2 When 0, pins P1.31:26 are GPIO pins. When 1, P1.31:26 are used as Debug port. 0 3 When 0, pins P1.25:16 are used as GPIO pins. When 1, P1.25:16 are used as Trace port. 0 31:30 Reserved - |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |