EPC600 datasheet(3/30 Pages) EPC

3 / 30 page

Absolute Maximum Ratings (Note 1, 2)

Operating Ratings

Supply Voltage VDD

-0.5V to +9.5V

Operating temperature (TA)

-20°C to +65°C

Voltage to any pin except VDD

according voltage class VSC (Note 3)

-0.3V to VSC+0.3V

Humidity, non-condensing

5% to 95%

Storage temperature (TA)

-65°C to +150°C

Soldering Lead Temperature (TL), 4 sec

+260°C

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating conditions indicate condi-

tions for which the device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and

test conditions, see Electrical Characteristics.

Note 2: This is a highly sensitive CMOS mixed signal device with an ESD rating of JEDEC HBM class 2 (2kV to < 4kV) except for the pins

VDD, VDDIO and SCLK with an ESD rating of JEDEC HBM class 1B ( 0.5kV to < 1kV). Handling and assembly of this device should only

be done at ESD protected workstations.

Note 3: For voltage classes VSC refer to Figure 4 and Table 4.

Electrical Characteristics

Operational Ratings - unless otherwise specified.

Symbol

Parameter

Conditions / Comments

VSC

Min.

Typ.

Max.

Unit

VDD

Supply voltage at VDD

8.5V

+8.0

+8.5

+9.0

VDD-PP

Ripple on VDD

peak-to-peak

8.5V

100

IDD-Average

Supply current

DC average , excl. LED driver current

8.5V

IDD-Peak

Supply current

peak, excl. LED driver current

8.5V

VDDBS

Bias voltage

no drift allowed

-5.0V

-4.9

-5.0

-5.1

VDDBS-PP

Ripple on VDDBS

peak-to-peak

-5.0V

IDDBS

Bias current

-5.0V

1.0

VLED

Voltage at LED

maximum

+5.0V

5.0

ILED-ON

Sink current at LED

open drain driver

+5.0V

180

VLED-ON

Forward voltage at LED

@ ILED-ON = 180mA

+5.0V

200

VDigital-OH

Output high voltage

at SDATA

+5.0V

4.5

5.2

VDigital-OL

Output low voltage

at SDATA

+5.0V

0.5

IDigital-OH

Output current

at SDATA, DC, average

+5.0V

0.1

IDigital-OL

Output current

at SDATADC, sink current

+5.0V

8.0

CDigital-Out

Load capacitance

+5.0V

VDigital-IH

Input high voltage

at SDATA and SCLK

+5.0V

4.0

5.0

VDigital-IL

Input low voltage

at SDATA and SCLK

+5.0V

1.0

IDigital-In

Input leakage current

except VDDT, DC

+5.0V

1.0

μA

IDigital-In

Input current

at VDDT; DC

+5.0V

μA

RDOWN

Termination resistor

at VDDT; pull-down resistor

+5.0V

120

kΩ

CDigital-In

Input capacitance

+5.0V

Table 1: Electrical characteristics

Characteristics subject to change without notice

3 / 30

Datasheet epc600 - V1.3

EPC600 датащи(PDF) 3 Page - Espros Photonics corp

EPC600 датащи(HTML) 3 Page - Espros Photonics corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

датащи скачать

ссылки URL