RN52 datasheet(18/26 Pages) MICROCHIP

18 / 26 page

RN52

DS70005120A-page 18

 2015 Microchip Technology Inc.

3.0

BLUETOOTH SIG

CERTIFICATION

The RN52 Bluetooth Audio Module has been certified

by Bluetooth SIG and the Qualified Design ID is 58578

and the Declaration ID is D023391. The Qualified

Design Listing certificate can be accessed on

www.microchip.com/rn52 or at the Bluetooth SIG list-

ings website.

4.0

REGULATORY APPROVAL

This section outlines the regulatory information for the

RN52 module for the following countries:

• United States

• Canada

• Europe

• Australia

• New Zealand

4.1

United States

The RN52 module has received Federal Communica-

tions Commission (FCC) CFR47 Telecommunications,

Part 15 Subpart C “Intentional Radiators” modular

approval in accordance with Part 15.212 Modular

Transmitter approval. Modular approval allows the end

user to integrate the RN52 module into a finished prod-

uct without obtaining subsequent and separate FCC

approvals for intentional radiation, provided no

changes or modifications are made to the module cir-

cuitry. Changes or modifications could void the user’s

authority to operate the equipment. The end user must

comply with all of the instructions provided by the

Grantee, which indicate installation and/or operating

conditions necessary for compliance.

The finished product is required to comply with all appli-

cable FCC equipment authorizations regulations,

requirements and equipment functions not associated

with the transmitter module portion. For example, com-

pliance must be demonstrated to regulations for other

transmitter components within the host product; to

requirements for unintentional radiators (Part 15 Sub-

part B “Unintentional Radiators”), such as digital

devices, computer peripherals, radio receivers, etc.;

and to additional authorization requirements for the

non-transmitter functions on the transmitter module

(i.e., Verification, or Declaration of Conformity) (e.g.,

transmitter modules may also contain digital logic func-

tions) as appropriate.

4.1.1

LABELING AND USER

INFORMATION REQUIREMENTS

The RN52 module has been labeled with its own FCC

ID number, and if the FCC ID is not visible when the

module is installed inside another device, then the out-

side of the finished product into which the module is

installed must also display a label referring to the

enclosed module. This exterior label can use wording

as follows:

A user’s manual for the product should include the

following statement:

Additional information on labeling and user information

requirements for Part 15 devices can be found in KDB

Publication 784748 available at the FCC Office of Engi-

neering and Technology (OET) Laboratory Division

Knowledge Database (KDB) http://apps.fcc.gov/oetcf/

kdb/index.cfm.

4.1.2

RF EXPOSURE

All transmitters regulated by FCC must comply with RF

exposure requirements. OET Bulletin 65, Evaluating

Compliance with FCC Guidelines for Human Exposure

to Radio Frequency Electromagnetic Fields, provides

assistance in determining whether proposed or existing

transmitting facilities, operations or devices comply

with limits for human exposure to Radio Frequency

Contains Transmitter Module FCC ID: T9J-RN52

Contains FCC ID: T9J-RN52

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This equip-

ment generates, uses and can radiate radio fre-

quency energy, and if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However,

there is no guarantee that interference will not occur

in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the follow-

ing measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is con-

nected.

• Consult the dealer or an experienced radio/TV

technician for help.

RN52 датащи(PDF) 18 Page - Microchip Technology

RN52 датащи(HTML) 18 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

датащи скачать

ссылки URL