| поискавой системы для электроныых деталей |
|
LP8545 датащи(PDF) 19 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
LP8545 датащи(HTML) 19 Page - Texas Instruments |
|
19 / 44 page ![]() EEPROM NVM 8 x 8 bits REGISTERS ADDRESS 00h...72h Startup or EE_READ=1 User Device Control EEPROM REGISTERS Address A0h...A7h EE_PROG = 1 Device Control +1 LSB PWM value 510 (10-bit) PWM value 510 1/2 (10-bit) PWM value 511 (10-bit) LP8545 www.ti.com SNVS635D – APRIL 2010 – REVISED DECEMBER 2013 Figure 16. Example of the Dithering, 1-bit dither, 10-bit resolution Driver Headroom Control Driver headroom can be controlled with <DRV_HEADR[2:0]> EEPROM bits. Driver headroom control sets the minimum threshold for the voltage over the LED output which has the smallest driver headroom and controls the boost output voltage accordingly. Boost output voltage step size is 125 mV. The LED output which has the smallest forward voltage is the one which has highest VF across the LEDs. The strings with highest forward voltage is detected automatically. To achieve best possible efficiency smallest possible headroom voltage should be selected. If there is high variation between LED strings, the headroom can be raised slightly to prevent any visual artifacts. EEPROM EEPROM memory stores various parameters for chip control. The 64-bit EEPROM memory is organized as 8 x 8 bits. The EEPROM structure consists of a register front-end and the non-volatile memory (NVM). Register data can be read and written through the serial interface, and data will be effective immediately. To read and program NVM, separate commands need to be sent. Erase and program voltages are generated on-chip charge pump, no other voltages than normal input voltage are required. A complete EEPROM memory map is shown in Table 3. NOTE EEPROM NVM can be programmed or read by customer for bench validation. Programming for production devices should be done in TI production test, where appropriate checks will be performed to confirm EEPROM validity. Writing to EEPROM Control register of production devices is not recommended. If special EEPROM configuration is required, please contact the TI Sales Office for availability. Copyright © 2010–2013, Texas Instruments Incorporated Submit Documentation Feedback 19 Product Folder Links: LP8545 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |