 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
GS6151 датащи(PDF) 63 Page - Semtech Corporation |
|
|
|||||||||||||||||||||||||||||
GS6151 датащи(HTML) 63 Page - Semtech Corporation |
|
|
63 / 77 page  GS6151 Final Data Sheet Rev.4 PDS-060389 August 2015 63 of 77 Semtech Proprietary & Confidential www.semtech.com 2Dh EYE_MON_ STATUS_REG_1 EYE_MON_PRBS_ERROR_ COUNT 15:0 RO 0h Twice the PRBS Error count from the most recent manually timed (MANUAL_SCAN_START) or continuous (CONTINUOUS_SCAN_ENABLE) scan measurements. This value is not defined for automatic (AUTO_SCAN_START) scan measurements. 2Eh EYE_MON_ STATUS_REG_2 RSVD 15:15 RO 0h Reserved. Do not change. STARTING_PHASE 14:8 RO 0h Starting (leftmost) phase of EYE_WIDTH in the most recent scan. This parameter only applies to automatic (AUTO_SCAN_START) measurements. EYE_WIDTH 7:0 RO 0h Widest open portion of the eye in the most recent scan, based on the ERROR_COUNT indication. The value of EYE_WIDTH is the number of contiguous phases with ERROR_COUNT less than or equal to ERROR_THRESHOLD. This parameter only applies to automatic (AUTO_SCAN_START) measurements. 2Fh EYE_MON_ STATUS_REG_3 ERROR_COUNT 15:0 RO 0h Error count from the most recent manually timed (MANUAL_SCAN_START) or continuous (CONTINUOUS_SCAN_ENABLE) scan measurements. This value is not defined for automatic (AUTO_SCAN_START) scan measurements. 30h EYE_MON_ STATUS_REG_4 EYE_BITMAP_127_112 15:0 RO 0h Bitmap of the per-phase pass/fail result from the most recent automatic (AUTO_SCAN_START) scan measurement for phases 127 to 112. A value of 1 in each bit indicates a pass for the corresponding phase, while a value of 0 indicates a fail for that phase. The order of the numbers shown in the Parameter Name field corresponds to the bit orientation for each phase being reported in this register. 31h EYE_MON_ STATUS_REG_5 EYE_BITMAP_111_96 15:0 RO 0h Bitmap of the per-phase pass/fail result from the most recent automatic (AUTO_SCAN_START) scan measurement for phases 111 to 96. A value of 1 in each bit indicates a pass for the corresponding phase, while a value of 0 indicates a fail for that phase. The order of the numbers shown in the Parameter Name field corresponds to the bit orientation for each phase being reported in this register. Table 5-1: Register Descriptions - Standard Address Space (Continued) Address Register Name Parameter Name Bit Slice R/W Reset Value Description |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
