| поискавой системы для электроныых деталей |
|
LAN9730 датащи(PDF) 102 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
LAN9730 датащи(HTML) 102 Page - Microchip Technology |
|
102 / 222 page ![]() LAN9730/LAN9730i DS00001946A-page 102 2012-2015 Microchip Technology Inc. 4.11 Power States The following power states are featured. • NORMAL (Unconfigured and Configured) • Suspend (SUSPEND0, SUSPEND1, SUSPEND2, and SUSPEND3) Figure 4-29 illustrates the power states and allowed state transitions. 4.11.1 NORMAL STATE The NORMAL state is the fully functional state of the device. The are two flavors of the NORMAL state, NORMAL Con- figured and NORMAL Unconfigured. In the Configured variation, all chip subsystem modules are enabled. The Uncon- figured variation has only a subset of the modules enabled. The reduced functionality allows for power savings. This NORMAL state is entered by any of the following methods: • A system reset is asserted. • The device is suspended and the host issues resume signaling. • The device is suspended and a wake event is detected. 4.11.1.1 Unconfigured Upon initially entering the NORMAL state, the device is unconfigured. The device transitions to the NORMAL Configured state upon the host completion of the USB configuration. It is possible for the device to be deconfigured by the host after being placed in the NORMAL Configured state, via a set_configuration command. In this case, the CPM must place the device back into the NORMAL Unconfigured state. 4.11.1.2 Reset Operation After a system reset, the device is placed into the NORMAL Unconfigured state. When in the NORMAL state, the READY bit in the Power Management Control Register (PMT_CTL) is set. This READY bit is useful to the host after a USB reset occurs. In this case, it indicates that the values in the EEPROM have been completely loaded. FIGURE 4-29: POWER STATES Note: It is not possible to transition from SUSPEND2 to NORMAL Configured if SUSPEND2 was entered via a transition from NORMAL Unconfigured. NORMAL (Configured) SUSPEND0 SUSPEND1 SUSPEND2 USB Resume || PHY Linkup || WOL || GPIO USB Suspend USB Resume || GPIO USB Suspend USB Resume || Energy Detect || GPIO USB Suspend POR || nRESET || USB Reset || SRST NORMAL (Unconfigured) Configured Deconfigured USB Resume || GPIO USB Suspend SUSPEND3 USB Suspend USB Resume || PHY Linkup || Frame Rec’d || GPIO |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |