ATmega16 datasheet(105/315 Pages) ATMEL

105 / 315 page

105

ATmega16(L)

2466E–AVR–10/02

Note:

1. A special case occurs when OCR1A/OCR1B equals TOP and COM1A1/COM1B1 is

set. In this case the compare match is ignored, but the set or clear is done at TOP.

See “Fast PWM Mode” on page 96. for more details.

Table 46 shows the COM1x1:0 bit functionality when the WGM13:0 bits are set to the

phase correct or the phase and frequency correct, PWM mode.

Note:

1. A special case occurs when OCR1A/OCR1B equals TOP and COM1A1/COM1B1 is

set. See “Phase Correct PWM Mode” on page 98. for more details.

• Bit 3 – FOC1A: Force Output Compare for Channel A

• Bit 2 – FOC1B: Force Output Compare for Channel B

The FOC1A/FOC1B bits are only active when the WGM13:0 bits specifies a non-PWM

mode. However, for ensuring compatibility with future devices, these bits must be set to

zero when TCCR1A is written when operating in a PWM mode. When writing a logical

one to the FOC1A/FOC1B bit, an immediate compare match is forced on the Waveform

Generation unit. The OC1A/OC1B output is changed according to its COM1x1:0 bits

setting. Note that the FOC1A/FOC1B bits are implemented as strobes. Therefore it is

the value present in the COM1x1:0 bits that determine the effect of the forced compare.

Table 45. Compare Output Mode, Fast PWM(1)

COM1A1/COM1B1

COM1A0/COM1B0

Description

Normal port operation, OC1A/OC1B

disconnected.

WGM13:0 = 15: Toggle OC1A on Compare

Match, OC1B disconnected (normal port

operation).

For all other WGM13:0 settings, normal port

operation, OCnA/OCnB disconnected.

Clear OC1A/OC1B on compare match, set

OC1A/OC1B at TOP

Set OC1A/OC1B on compare match, clear

OC1A/OC1B at TOP

Table 46. Compare Output Mode, Phase Correct and Phase and Frequency Correct

PWM (1)

COM1A1/COM1B1

COM1A0/COM1B0

Description

Normal port operation, OC1A/OC1B

disconnected.

WGM13:0 = 9 or 14: Toggle OCnA on

Compare Match, OCnB disconnected (normal

port operation).

For all other WGM13:0 settings, normal port

operation, OC1A/OC1B disconnected.

Clear OC1A/OC1B on compare match when

up-counting. Set OC1A/OC1B on compare

match when downcounting.

Set OC1A/OC1B on compare match when up-

counting. Clear OC1A/OC1B on compare

match when downcounting.

ATMEGA16 датащи(PDF) 105 Page - ATMEL Corporation

ATMEGA16 датащи(HTML) 105 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL