LTC1404CS8 datasheet(21/24 Pages) LINER

21 / 24 page

LTC1404

TYPICAL APPLICATIONS

THIS PROGRAM DEMONSTRATES THE LTC1404 INTERFACE TO

THE ADSP-2181. FRAME SYNC PULSE IS GENERATED FROM RFS.

DATA SHIFT CLOCK IS EXTERNALLY GENERATED.

/*Section 1: Initialization*/

.module/ram/abs = 0 adspltc;

/*define the program module*/

jump start;

/*jump over interrupt vectors*/

nop; nop; nop;

rti; rti; rti; rti;

/*code vectors here upon IRQ2 int*/

rti; rti; rti; rti;

/*code vectors here upon IRQL1 int*/

rti; rti; rti; rti;

/*code vectors here upon IRQL0 int*/

rti; rti; rti; rti;

/*code vectors here upon SPORT0 TX int*/

ax0 = rx0;

/*Section 5*/

dm (0x2000) = ax0; /*begin of SPORT0 receive interrupt*/

rti;

/* */

/*end of SPORT0 receive interrupt*/

rti; rti; rti; rti;

/*code vectors here upon /IRQE int*/

rti; rti; rti; rti;

/*code vectors here upon BDMA interrupt*/

rti; rti; rti; rti;

/*code vectors here upon SPORT1 TX (IRQ1) int*/

rti; rti; rti; rti;

/*code vectors here upon SPORT1 RX (IRQ0) int*/

rti; rti; rti; rti;

/*code vectors here upon TIMER int*/

rti; rti; rti; rti;

/*code vectors here upon POWER DOWN int*/

/*Section 2: Configure SPORT0*/

start:

/*to configure SPORT0 control reg*/

/*SPORT0 address = 0X3FF6*/

/*RFS is used for frame sync generation*/

/*RFS is internal, TFS is not used*/

/*bit 0-3 = Slen*/

/*F = 15 = 1111*/

/*E = 14 = 1110*/

/*D = 13 = 1101*/

/*bit 4,5 data type right justified zero filled MSB*/

/*bit 6 INVRFS = 0*/

/*bit 7 INVTFS = 0*/

/*bit 8 IRFS=1 receive internal frame sync*/

/*bit 9,10,11 are for TFS (don’t care)*/

/*bit 12 RFSW=0 receive is Normal mode*/

/*bit 13 RTFS=1 receive is framed mode*/

/*bit 14 ISCLK=0 SCLK is external */

/*bit 15 multichannel mode = 0*/

ax0 = 0x2F0D;

/*normal mode, bit 12=0*/

/*if alternate mode bit 12=1, ax0=0x3F0E*/

dm (0x3FF6) =ax0;

/*Section 3: configure CLKDIV and RFSDIV, setup interrupts*/

/*Using an external clock source=9.6MHz*/

/*Does not need to configure CLKDIV*/

/*to Configure RFSDIV*/

ax0 = 15;

/*set the RFSDIV reg = 15*/

/*=> the frame sync pulse for every 16 SCLK*/

/*if frame sync pulse in every 15 SCLK, ax0=14*/

dm(0x3FF4) =ax0;

/*to setup interrupt*/

ifc= 0x0066;

/*clear any extraneous SPORT interrupts*/

icntl= 0;

/*IRQXB = level sensitivity*/

/*disable nesting interrupt*/

imask= 0x0020;

/*bit 0 = timer int = 0*/

/*bit 1 = SPORT1 or IRQ0B int = 0*/

/*bit 2 = SPORT1 or IRQ1B int = 0*/

/*bit 3 = BDMA int = 0*/

/*bit 4 = IRQEB int = 0*/

/*bit 5 = SPORT0 receive int = 1*/

/*bit 6 = SPORT0 transmit int = 0*/

/*bit 7 = IRQ2B int = 0*/

/*enable SPORT0 receive interrupt*/

/*Section 4: Configure System Control Register and Start Communication*/

/*to configure system control reg*/

ax0 = dm(0x3FFF);

/*read the system control reg*/

ay0 = 0xFFF0;

ar = ax0 AND ay0;

/*set wait state to zero*/

ay0 = 0x1000;

ar = ar OR ay0;

/*bit 12 = 1, enable SPORT0*/

dm(0x3FFF) = ar;

/*frame sync pulse regenerated automatically*/

cntr = 5000;

do waitloop until ce;

nop;

waitloop: nop;

rts;

.endmod;

ADSP2181 Code for Circuit

LTC1404CS8 датащи(PDF) 21 Page - Linear Technology

LTC1404CS8 датащи(HTML) 21 Page - Linear Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

датащи скачать

ссылки URL