CS4630 datasheet(30/38 Pages) CIRRUS

30 / 38 page

CS4630

DS445PP1

12.1 PCI Interface

AD[31:0] - Address / Data Bus, I/O

These pins form the multiplexed address/data bus for the PCI interface.

C/BE[3:0]# - Command Type / Byte Enables, I/O

These four pins are the multiplexed command/byte enables for the PCI interface. During the

address phase of a transaction, these pins indicate cycle type. During the data phases of a

transaction, active low byte enable information for the current data phase is indicated. These

pins are inputs during slave operation and they are outputs during bus mastering operation.

PAR - Parity, I/O, Active High

The Parity pin indicates even parity across AD[31:0] and C_BE[3:0] for both address and data

phases. The signal is delayed one PCI clock from either the address or data phase for which

parity is generated.

FRAME# - Cycle Frame, I/O, Active Low

FRAME# is driven by the current PCI bus master to indicate the beginning and duration of a

transaction.

IRDY# - Initiator Ready, I/O, Active Low

IRDY# is driven by the current PCI bus master to indicate that as the initiator it is ready to

transmit or receive data (complete the current data phase).

TRDY# - Target Ready, I/O, Active Low

TRDY# is driven by the current PCI bus target to indicate that as the target device it is ready to

transmit or receive data (complete the current data phase).

STOP# - Transition Stop, I/O, Active Low

STOP# is driven active by the current PCI bus target to indicate a request to the master to stop

the current transaction.

IDSEL - Initialize Device Select, Input, Active High

IDSEL is used as a chip select during PCI configuration read and write cycles.

DEVSEL# - Device Select, I/O, Active Low

DEVSEL# is driven by the PCI bus target device to indicate that it has decoded the address of

the current transaction as its own chip select range.

REQ# - Master Request, Three-State Output, Active Low

REQ# indicates to the system arbiter that this device is requesting access to the PCI bus. This

pin is high-impedance when RST# is active.

CS4630 датащи(PDF) 30 Page - Cirrus Logic