| поискавой системы для электроныых деталей |
|
DSPIC30F5015 датащи(PDF) 103 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
DSPIC30F5015 датащи(HTML) 103 Page - Microchip Technology |
|
103 / 234 page ![]() © 2011 Microchip Technology Inc. DS70149E-page 103 dsPIC30F5015/5016 15.7.2 DEAD-TIME ASSIGNMENT The DTCON2 SFR contains control bits that allow the dead times to be assigned to each of the complemen- tary outputs. Table 15-1 summarizes the function of each dead-time selection control bit. TABLE 15-1: DEAD-TIME SELECTION BITS 15.7.3 DEAD-TIME RANGES The amount of dead time provided by each dead-time unit is selected by specifying the input clock prescaler value and a 6-bit unsigned value. The amount of dead time provided by each unit may be set independently. Four input clock prescaler selections have been pro- vided to allow a suitable range of dead times, based on the device operating frequency. The clock prescaler option may be selected independently for each of the two dead-time values. The dead-time clock prescaler values are selected using the DTAPS<1:0> and DTBPS<1:0> control bits in the DTCON1 SFR. One of four clock prescaler options (TCY, 2 TCY, 4 TCY or 8 TCY) may be selected for each of the dead-time values. After the prescaler values are selected, the dead time for each unit is adjusted by loading two 6-bit unsigned values into the DTCON1 SFR. The dead-time unit prescalers are cleared on the following events: • On a load of the down timer due to a duty cycle comparison edge event. • On a write to the DTCON1 or DTCON2 registers. • On any device Reset. FIGURE 15-4: DEAD-TIME TIMING DIAGRAM Bit Selects DTS1A PWM1L/PWM1H active edge dead time. DTS1I PWM1L/PWM1H inactive edge dead time. DTS2A PWM2L/PWM2H active edge dead time. DTS2I PWM2L/PWM2H inactive edge dead time. DTS3A PWM3L/PWM3H active edge dead time. DTS3I PWM3L/PWM3H inactive edge dead time. DTS4A PWM4L/PWM4H active edge dead time. DTS4I PWM4L/PWM4H inactive edge dead time. Note: The user should not modify the DTCON1 or DTCON2 values while the PWM mod- ule is operating (PTEN = 1). Unexpected results may occur. Duty Cycle Generator PWMxH PWMxL Time selected by DTSxA bit (A or B) Time selected by DTSxI bit (A or B) |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |