 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
AM3703CUS датащи(PDF) 121 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
AM3703CUS датащи(HTML) 121 Page - Texas Instruments |
|
|
121 / 280 page  AM3715, AM3703 www.ti.com SPRS616F – JUNE 2010 – REVISED AUGUST 2011 3.3 DC Electrical Characteristics Table 3-5 summarizes the dc electrical characteristics. Note: The interfaces or signals described in Table 3-5 correspond to the interfaces or signals available in multiplexing mode 0. All interfaces or signals multiplexed on the balls / pins described in Table 3-5 have the same DC electrical characteristics. Table 3-5. DC Electrical Characteristics PARAMETER MIN NOM MAX UNIT SDRC Mode (CBP Balls(19): C14 / B14 / C15 / B16 / D17 / C17 / B17 / D18 / H9 / H10 / H11 / H12 / A13 / A14 / H16 / H17 / H14 / H13 / H15 / A16 / A17)(4) VIH High-level input voltage 0.7 * vdds_mem V VIL Low-level input voltage 0.3 * vdds_mem V VHYS (1) Hysteresis voltage at an input 0.07 V VOH High-level output voltage, driver enabled, IOH = –4 mA 0.8 * vdds_mem vdds_mem V pullup or pulldown disabled VOL Low-level output voltage, driver enabled, IOL = 4 mA 0 0.2 * vdds_mem V pullup or pulldown disabled CIN Input capacitance 1.15 pF tTIN (2) Input recommended rise, tRIN, and fall time, tFIN (measured 10 ns between 20% and 80% at PAD) tROUT (2) Output maximum rise time (rise time, tROUT, evaluated 1.15 ns between 20% and 80% at PAD) @ maximum load tFOUT (2) Output maximum fall time (fall time, tFOUT, evaluated 1.10 ns between 20% and 80% at PAD) @ maximum load COUT Load capacitance DS0 = 0(3) 2 4 pF DS0 = 1(3) 4 12 MMC Interface 1 Mode (CBP Balls(19): N28 / M27 / N27 / N26 / N25 / P28) 1.8-V Mode VIH High-level input voltage 0.70 * vdds_mmc1 vdds_mmc1 + 0.3 V VIL Low-level input voltage –0.3 0.30 * vdds_mmc1 V VOH High-level output voltage with 100- μA sink current IOH vdds_mmc1 – 0.2 V VOL Low-level output voltage with 100- μA sink current at 0.2 V vdds_mmc1 minimum VHYS (1) Hysteresis voltage at an input 0.1 V tTIN (2) Input transition time (tRIN or tFIN evaluated Normal Mode 3 ns between 10% and 90% at PAD) (SPEEDCTRL = 1)(4) High-Speed 8 (SPEEDCTRL = 0)(4) COUT Load capacitance 10 30 pF LOUT Line inductance (except vdds_mmc1) 16 nH 3.0-V Mode VIH High-level input voltage 0.625 * vdds_mmc1 vdds_mmc1 + 0.3 V VIL Low-level input voltage –0.3 0.25 * vdds_mmc1 V VOH High-level output voltage with 100- μA sink current IOH 0.75 * vdds_mmc1 V VOL Low-level output voltage with 100- μA source current at 0.125 * vdds_mmc1 V vdds_mmc1 minimum VHYS (1) Hysteresis voltage at an input 0.05 V Copyright © 2010–2011, Texas Instruments Incorporated Electrical Characteristics 121 Submit Documentation Feedback Product Folder Link(s): AM3715 AM3703 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
