S29CD032J datasheet(79/81 Pages) SPANSION

79 / 81 page

October 11, 2012 S29CD-J_CL-J_00_B7

S29CD-J and S29CL-J Flash Family

Data

She e t

Advanced Sector Protection/

Unprotection

Modified Advanced Sector Protection/Unprotection figure and notes. In some subsections, changed

“sector” to “sector group”.

DC Characteristics

Changed ICCB test conditions and ICC1 maximum specification.

Test Specifications

Changed CL.

Asynchronous Operations

Asynchronous Command Write Timing figure: Added note.

Asynchronous Read Operations table: Changed tRC, tACC, tCE for 75 MHz device.

Synchronous Operations

Burst Mode Read for 32 Mb and 16 Mb table: Changed tINDS, tCLKL, tAAVH, and tWADVH1

specifications.

Burst Mode Read figure: Modified period lengths for several specifications.

Erase/Program Operations

Added tWEH and tOEP specifications to table.

Latchup Characteristics

Deleted section.

Common Flash Memory Interface (CFI)

CFI System Interface String table: Modified description of address 1Bh.

CFI Primary Vendor-Specific Extended Query table: Modified data at address 45h.

Revision B3 (March 30, 2009)

Global

Removed “Preliminary”

Changed all instances of VCCQ to VIO

Distinctive Characteristics

Removed “or without” (wrap around) from Programmable Burst Interface bullet

Performance Characteristics

Added notice to refer to programming best practices application note for 32 Mb devices.

Ordering Information

Added S29CL032J to valid OPN diagram.

Corrected valid combinations table.

Input/Output Descriptions and Logic

Symbols

Subscript CC for VCC, IO for VIO, SS for VSS in table.

Changed type for VIO to “Supply”

Changed type for VSS to “Supply”

Block Diagram

Removed DQmax-DQ0 label from inputs to Burst Address Counter and Address Latch.

Removed Amax-A0 label from I/O Buffers.

Table: S29CD016J/CL016J (Top Boot)

Sector and Memory Address Map

Changed Note 2 to refer to Bank 0 and 1 instead of Bank 1 and 2.

Table: 32-Bit Linear and Burst Data

Order

Removed “x16”

Removed “A0:A-1” from Output Data Sequence column for Four Linear Data Transfers.

Removed “A1:A-1” from Output Data Sequence column for Eight Linear Data Transfers.

Programming

Added notice to refer to programming best practices application note for 32 Mb devices.

Table: DC Characteristic, CMOS

Compatible

Changed Max ICCB for S29CL-J to 90 mA.

Table: Burst Mode for 32 Mb and 16 Mb

Corrected values for tBDH with separate values for 16Mb and 32Mb.

Added tWADVS parameter to table.

Figure: Synchronous Command Write/

Read Timing

Added timing definition for tWADVS.

Table: Erase/Program Operations

Appended “from WE# Rising Edge” to tAH description.

Changed tAH Min to 11.75 ns.

Figure: Program Operation Timings

Updated timing diagram to reflect new tAH value.

Figure: Chip/Sector Erase Operation

Timings

Updated timing diagram to reflect new tAH value.

Table: Alternate CE# Controlled Erase/

Program Operations

Removed tWADVS parameter.

Product Overview

Removed “or without”.

Table: Device Bus Operation

Changed “X” to “H” under CLK column for CE# row.

Accelerated Program and Erase

Operations

Removed all mention of accelerated erase.

Unlock Bypass

Removed mention of unlock bypass sector erase.

Simultaneous Read/Write

Added in warning to indicate restrictions on Simultaneous Read/Write conditions.

Section

Description

S29CD032J датащи(PDF) 79 Page - SPANSION

S29CD032J датащи(HTML) 79 Page - SPANSION

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81

датащи скачать

ссылки URL