| поискавой системы для электроныых деталей |
|
705-5100-F21 датащи(PDF) 14 Page - Magnetrol International, Inc. |
|
|
|||||||||||||||||||||||||||||
705-5100-F21 датащи(HTML) 14 Page - Magnetrol International, Inc. |
|
14 / 52 page ![]() 14 57-645 Eclipse Guided Wave Radar Transmitter - PROFIBUS PA™ 3.4.2 Installing a Twin Rod Probe (Models 7xB, 7x5, and 7x7) Before installing, make sure the: • Model and serial numbers on the nameplates of the Eclipse probe and transmitter are identical. • Probe has adequate headroom for installation and has unob- structed entry to the bottom of the vessel. • Process temperature, pressure, dielectric, viscosity, and media buildup are within the probe specifications for the installation. Nozzles: The 7xB/7x5/7x7 Twin Rod probes may be susceptible to objects that are in close proximity. The following rules should be followed for proper application: 1. Nozzles should be 3" (80 mm) diameter or larger. 2. 7xB/7x5/7x7 Twin Rod probes should be installed such that the active rod is >1" (25 mm) from metallic objects such as pipes, ladders, etc., (a bare tank wall parallel to the probe is acceptable). 3.4.2.1 To install a rigid twin rod probe: x Make sure the process connection is at least 2" NPT or a flanged mounting. y Make sure that there is at least 1" (25 mm) spacing between the active probe rod and any part of the tank (walls, still- well, pipes, support beams, mixer blades, etc.). Minimum stillwell diameter for Twin Rod probe is 3". z Carefully place the probe into the vessel. Align the gasket on flanged installations. { Align the probe process connection with the threaded or flanged mounting on the vessel. | For threaded connections, tighten the hex nut of the probe process connection. For flanged connections, tighten flange bolts. } Probe can be stabilized by attaching the inactive probe rod to vessel. NOTE: If the transmitter is to be installed at a later time, do not remove the protective cap from the probe. Do not use sealing com- pound or TFE tape on probe connection to transmitter as this connection is sealed by a Viton® O-ring. Active probe rod Inactive probe rod x y z { | } |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |