PCA2000_2001

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2010. All rights reserved.

Product data sheet

Rev. 08 — 23 August 2010

22 of 30

NXP Semiconductors

PCA2000; PCA2001

32 kHz watch circuit with programmable adaptive motor pulse

The orientation of the IC in a pocket is indicated by the position of the IC type name on the surface

of the die, with respect to the cut corner on the upper left of the tray.

Fig 16. Tray alignment

Table 14.

Tray dimensions

Dimension

Description

Value

A

pocket pitch; x direction

2.15 mm

B

pocket pitch; y direction

2.43 mm

C

pocket width; x direction

1.01 mm

D

pocket width; y direction

1.39 mm

E

tray width; x direction

50.67 mm

F

tray width; y direction

50.67 mm

G

distance from cut corner to pocket (1, 1)

center

4.86 mm

H

distance from cut corner to pocket (1, 1)

center

4.66 mm

J

tray thickness

3.94 mm

M

pocket depth

0.61 mm

x

number of pockets in x direction

20

y

number of pockets in y direction

18

mgu652