SC312XDP512F0MPVR datasheet(1000/1348 Pages) FREESCALE

1000 / 1348 page

Chapter 24 DG128 Port Integration Module (S12XDG128PIMV2)

MC9S12XDP512 Data Sheet, Rev. 2.21

1002

Freescale Semiconductor

The DDRT bits revert to controlling the I/O direction of a pin when the associated timer output compare

is disabled.

The timer input capture always monitors the state of the pin.

24.0.5.16 Port T Reduced Drive Register (RDRT)

Read: Anytime.

Write: Anytime.

This register configures the drive strength of each port T output pin as either full or reduced. If the port is

used as input this bit is ignored.

24.0.5.17 Port T Pull Device Enable Register (PERT)

Read: Anytime.

Write: Anytime.

Table 24-19. DDRT Field Descriptions

Field

Description

7–0

DDRT[7:0]

Data Direction Port T

0 Associated pin is conﬁgured as input.

1 Associated pin is conﬁgured as output.

Note: Due to internal synchronization circuits, it can take up to 2 bus clock cycles until the correct value is read

on PTT or PTIT registers, when changing the DDRT register.

76543210

RDRT7

RDRT6

RDRT5

RDRT4

RDRT3

RDRT2

RDRT1

RDRT0

Reset

00000000

Figure 24-18. Port T Reduced Drive Register (RDRT)

Table 24-20. RDRT Field Descriptions

Field

Description

7–0

RDRT[7:0]

Reduced Drive Port T

0 Full drive strength at output.

1 Associated pin drives at about 1/6 of the full drive strength.

76543210

PERT7

PERT6

PERT5

PERT4

PERT3

PERT2

PERT1

PERT0

Reset

00000000

Figure 24-19. Port T Pull Device Enable Register (PERT)

SC312XDP512F0MPVR датащи(PDF) 1000 Page - Freescale Semiconductor, Inc

SC312XDP512F0MPVR датащи(HTML) 1000 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL