S8AS

2

Specifications

S8AS-24006

@

Note: Refer to the next page for information on

*1 to *5.

Item

Model

S8AS-24006

S8AS-24006N

S8AS-24006R

Efficiency (Typ.)

80% min.

Input

condi-

tions

Voltage range

*1

100 to 240 VAC (85 to 264 VAC)

Frequency

*1

50/60 Hz (47 to 63 Hz)

Current

100-V input

3.8 A max.

200-V input

2.0 A max.

Power factor

0.95 min.

Harmonic current

EN61000-3-2

Leakage

current

100-V input

0.5 mA max.

200-V input

1.0 mA max.

Inrush current

*2

100-V input

25 A max. (for a cold start at 25

°C)

200-V input

50 A max. (for a cold start at 25

°C)

Output

condi-

tions

Number of branches

6

Maximum cutoff output current (per branch)

3.8 A

Total output current

10 A

Allowable voltage range

*3

±10% (with V.ADJ)

Ripple noise voltage

2.0% [P-P] max. (for rated input and output voltage)

*4

Output leakage current

10 mA max.

Input fluctuation

0.5% max. (Input: 85 to 264 VAC, 100% load)

*5

Load fluctuation (rated input voltage)

4.0% max. (rated input, 0% to 100% load)

*5

Temperature fluctuation

0.05%/

°C max.

Startup time

*2

3,000 ms max. (for rated input and output voltage)

*4

Output hold time

*2

20 ms max. (for rated input and output voltage)

*4

Func-

tions

Tripping

functions

Abnormal voltage tripping

28.8 V (Cannot be changed.)

Abnormal current tripping

*2

Setting range: 0.5 to 3.8 A

(in 0.1-A increments)

3.8 A (Cannot be changed.)

Setting range: 0.5 to 3.8 A

(in 0.1-A increments)

Abnormal total current tripping

Branch outputs are cut off when the total output current is more than 17 A for 2 s, 15 A for 5 s, 13 A for 10 s, or 12 A for 20 s.

Tripping alarm output

Photoswitch output

30 VDC max. and 50 mA max., Leakage current: 0.1 mA max., Residual voltage: 2 V max.

Undervoltage

detection

functions

Undervoltage detection

Setting range: 18.0 to 26.4 V

(in 0.1-V increments)

20.0 V (Cannot be changed.)

Setting range: 18.0 to 26.4 V

(in 0.1-V increments)

Undervoltage detection output

Photoswitch output

30 VDC max. and 50 mA max., Leakage current: 0.1 mA max., Residual voltage: 2 V max.

Maintenance

forecast

monitor

function

Maintenance forecast monitor

Setting range: 0.0 to 5.0 yr

(in 0.5-yr increments)

0.5 yr (Cannot be changed.)

Setting range: 0.0 to 5.0 yr

(in 0.5-yr increments)

Maintenance forecast monitor

output

Photoswitch output

30 VDC max. and 50 mA max., Leakage current: 0.1 mA max., Residual voltage: 2 V max.

Over-

temperature

detection

function

Over-temperature

Setting range: 25 to 90

°C

(in 1

°C increments)

90

°C (Cannot be changed.)

Setting range: 25 to 90

°C

(in 1

°C increments)

Over-temperature output

Photoswitch output

30 VDC max. and 50 mA max., Leakage current: 0.1 mA max., Residual voltage: 2 V max.

Display

functions

Output voltage display

Display range:17.0 to 30.0 V

Display accuracy: 2% rdg

±1 digit max.

Output current display

Branch output display range: 0.0 to 4.0 A

Peak output current display range: 0.0 to 20.0 A

Total current display range: 0.0 to 40.0 A

Display accuracy: 5% FS (4 A)

±1 digit max.

Maintenance forecast monitor

display

Display range: FUL (Full)/HLF (Half)/0.0 to 5.0 yr

Temperature display

Display range:

−20 to 100°C

Display accuracy: 2

°C ±1 digit max.

External Tripping Input

The input can be enabled or disabled for

each branch output.

19.2 to 30.0 VDC, minimum signal

width: 10 ms, tripping after input within

20 ms + the shutdown sequence set

time

All branch outputs: Enabled

(Cannot be changed.)

19.2 to 30.0 VDC, minimum signal

width: 10 ms, tripping after input within

20 ms + the shutdown sequence set

time

The input can be enabled or disabled for

each branch output.

19.2 to 30.0 VDC, minimum signal

width: 10 ms, tripping after input within

20 ms + the shutdown sequence set

time

Startup sequence

Setting range: 0.0 to 99.9 s in 0.1-s

increments

Branch output 1: 0.0 s

(Cannot be changed.)

Branch output 2: 0.4 s

(Cannot be changed.)

Branch output 3: 0.8 s

(Cannot be changed.)

Branch output 4: 1.2 s

(Cannot be changed.)

Branch output 5: 1.6 s

(Cannot be changed.)

Branch output 6: 2.0 s

(Cannot be changed.)

Setting range: 0.0 to 99.9 s in 0.1-s

increments

Shutdown sequence

Setting range: 0.0 to 99.9 s in 0.1-s

increments

All branch outputs: 0.0 s

(Cannot be changed.)

Setting range: 0.0 to 99.9 s in 0.1-s

increments

Communications

Not supported

Supported (RS-485)

Sampling period

1 ms

Parallel connection

Not supported

Series connection

Not supported