ATmega328P datasheet(118/448 Pages) ATMEL

118 / 448 page

118

8161D–AVR–10/09

ATmega48PA/88PA/168PA/328P

Note:

1. See ”About Code Examples” on page 7.

For I/O Registers located in extended I/O map, “IN”, “OUT”, “SBIS”, “SBIC”, “CBI”, and “SBI”

instructions must be replaced with instructions that allow access to extended I/O. Typically

“LDS” and “STS” combined with “SBRS”, “SBRC”, “SBR”, and “CBR”.

The assembly code example requires that the r17:r16 register pair contains the value to be writ-

ten to TCNT1.

15.3.1

Reusing the Temporary High Byte Register

If writing to more than one 16-bit register where the high byte is the same for all registers written,

then the high byte only needs to be written once. However, note that the same rule of atomic

operation described previously also applies in this case.

15.4

Timer/Counter Clock Sources

The Timer/Counter can be clocked by an internal or an external clock source. The clock source

is selected by the Clock Select logic which is controlled by the Clock Select (CS12:0) bits

located in the Timer/Counter control Register B (TCCR1B). For details on clock sources and

prescaler, see ”Timer/Counter0 and Timer/Counter1 Prescalers” on page 141.

Assembly Code Example(1)

TIM16_WriteTCNT

; Save global interrupt flag

r18,SREG

; Disable interrupts

cli

; Set TCNT

1 to r17:r16

out

TCNT

1H,r17

out

TCNT

1L,r16

; Restore global interrupt flag

out

SREG,r18

ret

C Code Example

(1)

void

TIM16_WriteTCNT

1( unsigned int i )

{

unsigned char

sreg;

unsigned int

/* Save global interrupt flag */

sreg = SREG;

/* Disable interrupts */

_CLI();

/* Set TCNT

1 to i */

TCNT

1 = i;

/* Restore global interrupt flag */

SREG = sreg;

}

ATmega328P датащи(PDF) 118 Page - ATMEL Corporation

ATmega328P датащи(HTML) 118 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL