CS5571

DS768PP1

33

3/25/08

10:56

5. PACKAGE DIMENSIONS

Notes:

1.“D” and “E1” are reference datums and do not included mold flash or protrusions, but do include mold mismatch and are measured

at the parting line, mold flash or protrusions shall not exceed 0.20 mm per side.

2.Dimension “b” does not include dambar protrusion/intrusion. Allowable dambar protrusion shall be 0.13 mm total in excess of “b”

dimension at maximum material condition. Dambar intrusion shall not reduce dimension “b” by more than 0.07 mm at least

material condition.

3.These dimensions apply to the flat section of the lead between 0.10 and 0.25 mm from lead tips.

INCHES

MILLIMETERS

NOTE

DIM

MIN

NOM

MAX

MIN

NOM

MAX

A

--

--

0.084

--

--

2.13

A1

0.002

0.006

0.010

0.05

0.13

0.25

A2

0.064

0.068

0.074

1.62

1.73

1.88

b

0.009

--

0.015

0.22

--

0.38

2,3

D

0.311

0.323

0.335

7.90

8.20

8.50

1

E

0.291

0.307

0.323

7.40

7.80

8.20

E1

0.197

0.209

0.220

5.00

5.30

5.60

1

e

0.022

0.026

0.030

0.55

0.65

0.75

L

0.025

0.03

0.041

0.63

0.75

1.03

∝

0°

4°

8°

0°

4°

8°

JEDEC #: MO-150

Controlling Dimension is Millimeters.

24L SSOP PACKAGE DRAWING

E

N

1 23

e

A1

A2

A

D

SEATING

PLANE

L

SIDE VIEW

END VIEW

TOP VIEW

∝