PCF8534AUSLASHDASLASH1 datasheet(39/44 Pages) NXP

39 / 44 page

PCF8534A_3

Product data sheet

Rev. 03 — 10 November 2008

39 of 44

NXP Semiconductors

PCF8534A

Universal LCD driver for low multiplex rates

18. Soldering of SMD packages

This text provides a very brief insight into a complex technology. A more in-depth account

of soldering ICs can be found in Application Note

AN10365 “Surface mount reﬂow

soldering description”.

18.1 Introduction to soldering

Soldering is one of the most common methods through which packages are attached to

Printed Circuit Boards (PCBs), to form electrical circuits. The soldered joint provides both

the mechanical and the electrical connection. There is no single soldering method that is

ideal for all IC packages. Wave soldering is often preferred when through-hole and

Surface Mount Devices (SMDs) are mixed on one printed wiring board; however, it is not

suitable for ﬁne pitch SMDs. Reﬂow soldering is ideal for the small pitches and high

densities that come with increased miniaturization.

18.2 Wave and reﬂow soldering

Wave soldering is a joining technology in which the joints are made by solder coming from

a standing wave of liquid solder. The wave soldering process is suitable for the following:

• Through-hole components

• Leaded or leadless SMDs, which are glued to the surface of the printed circuit board

Not all SMDs can be wave soldered. Packages with solder balls, and some leadless

packages which have solder lands underneath the body, cannot be wave soldered. Also,

leaded SMDs with leads having a pitch smaller than ~0.6 mm cannot be wave soldered,

due to an increased probability of bridging.

The reﬂow soldering process involves applying solder paste to a board, followed by

component placement and exposure to a temperature proﬁle. Leaded packages,

packages with solder balls, and leadless packages are all reﬂow solderable.

Key characteristics in both wave and reﬂow soldering are:

• Board speciﬁcations, including the board ﬁnish, solder masks and vias

• Package footprints, including solder thieves and orientation

• The moisture sensitivity level of the packages

Table 22.

Tray dimensions

Symbol

Description

Value

pocket pitch in x direction

5.5 mm

pocket pitch in y direction

4.9 mm

pocket width in x direction

3.08 mm

pocket width in y direction

2.79 mm

tray width in x direction

50.8 mm

tray width in y direction

50.8 mm

number of pockets, x direction

number of pockets, y direction

PCF8534AU/DA/1 датащи(PDF) 39 Page - NXP Semiconductors

PCF8534AU/DA/1 датащи(HTML) 39 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

датащи скачать

ссылки URL