| поискавой системы для электроныых деталей |
|
56F827 датащи(PDF) 46 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
56F827 датащи(HTML) 46 Page - Freescale Semiconductor, Inc |
|
46 / 60 page ![]() 56F827 Technical Data, Rev. 12 46 Freescale Semiconductor Delay from STCK high to STFS (bl) high - Slave5 tTFSBHS 0.1 — 46 ns Delay from STCK high to STFS (wl) high - Slave5 tTFSWHS 0.1 — 46 ns Delay from SRCK high to SRFS (bl) high - Slave5 tRFSBHS 0.1 — 46 ns Delay from SRCK high to SRFS (wl) high - Slave5 tRFSWHS 0.1 — 46 ns Delay from STCK high to STFS (bl) low - Slave5 tTFSBLS -1 — — ns Delay from STCK high to STFS (wl) low - Slave5 tTFSWLS -1 — — ns Delay from SRCK high to SRFS (bl) low - Slave5 tRFSBLS -46 — — ns Delay from SRCK high to SRFS (wl) low - Slave5 tRFSWLS -46 — — ns STCK high to STXD enable from high impedance - Slave tTXES —— — ns STCK high to STXD valid - Slave tTXVS 1— 25 ns STFS high to STXD enable from high impedance (first bit) - Slave tFTXES 5.5 — 25 ns STFS high to STXD valid (first bit) - Slave tFTXVS 6— 27 ns STCK high to STXD not valid - Slave tTXNVS 11 — 13 ns STCK high to STXD high impedance - Slave tTXHIS 11 — 28.5 ns SRXD Setup time before SRCK low - Slave tSS 4— — ns SRXD Hold time after SRCK low - Slave tHS 4— — ns Synchronous Operation (in addition to standard external clock parameters) SRXD Setup time before STCK low - Slave tTSS 4— — — SRXD Hold time after STCK low - Slave tTHS 4— — — 1. Slave mode is externally generated clocks and frame syncs 2. Max clock frequency is IP_clk/4 = 40MHz / 4 = 10MHz for an 80MHz part. 3. All the timings for the SSI are given for a non-inverted serial clock polarity (TSCKP=0 in SCR2 and RSCKP=0 in SCSR) and a non-inverted frame sync (TFSI=0 in SCR2 and RFSI=0 in SCSR). If the polarity of the clock and/or the frame sync have been inverted, all the timings remain valid by inverting the clock signal STCK/SRCK and/or the frame sync STFS/SRFS in the tables and in the figures. 4. 50% duty cycle 5. bl = bit length; wl = word length Table 3-15 SSI Slave Mode1 Switching Characteristics Operating Conditions: VSSIO=VSS = VSSA = 0V, VDDA =VDDIO=3.0–3.6V, VDD = 2.25–2.75V, TA = –40° to +85°C, CL ≤ 50pF, fop = 80MHz Parameter Symbol Min Typ Max Units |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |