| поискавой системы для электроныых деталей |
|
LP85571 датащи(PDF) 25 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
LP85571 датащи(HTML) 25 Page - Texas Instruments |
|
25 / 49 page ![]() LP8557, LP85571 www.ti.com SNVSA15B – DECEMBER 2013 – REVISED DECEMBER 2015 8.6.1.2 STATUS Address: 0x01h Reset: 0x00h D7 D6 D5 D4 D3 D2 D1 D0 LED_OPEN* LED_SHORT – BST_UV BST_OVP BST_OCP TSD UVLO Bits Field Type Default Description 7 LED_OPEN* R/O 0b An LED_OPEN* condition was detected on one or more strings. The condition is set when the headroom voltage on one or more current sinks is below the LOW comparator threshold, and the boost voltage is at the maximum. This fault condition may be caused by one or more OPEN LED strings or by one or more current sinks shorted to GND. Once set this bit stays set until the STATUS register is read. An LED_OPEN* condition turns off the backlight when CONFIG.AUTO is 0. When CONFIG.AUTO is 1, the condition is never set. 6 LED_SHORT R/O 0b An LED SHORT condition was detected on one or more strings. The condition is set when the headroom voltage on one or more current sinks is above the FAULT comparator threshold and at least one driver has the headroom voltage in regulation (between LOW and MID comparator thresholds). This fault condition may be caused by one or more shorted LEDs on one or more (but not all) strings. Once set this bit stays set until the STATUS register is read. 5 reserved R/O 0b 4 BST_UV R/O 0b A boost output undervoltage condition was detected. The boost voltage is 2.5 V (typical) or more below the target. Once set this bit stays set until the STATUS register is read. 3 BST_OVP R/O 0b A boost overvoltage protection condition was detected. The boost voltage is 1.6 V (typical) above the VMAX value. Once set this bit stays set until the STATUS register is read. 2 BST_OCP R/O 0b A boost overcurrent protection condition was detected. Once set this bit stays set until the STATUS register is read. 1 TSD R/O 0b A thermal shutdown condition was detected. Once set, this bit stays set until the STATUS register is read. A thermal shutdown condition turns off the backlight. 0 UVLO R/O 0b An input undervoltage lockout condition was detected. Once set, this bit stays set until the STATUS register is read. An undervoltage lockout condition turns off the backlight. Copyright © 2013–2015, Texas Instruments Incorporated Submit Documentation Feedback 25 Product Folder Links: LP8557 LP85571 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |