| поискавой системы для электроныых деталей |
|
AX88796ALF датащи(PDF) 16 Page - ASIX Electronics Corporation |
|
|
|||||||||||||||||||||||||||||
AX88796ALF датащи(HTML) 16 Page - ASIX Electronics Corporation |
|
16 / 68 page ![]() 16 AX88796ALF 3-in-1 Local Bus Fast Ethernet Controller Copyright © 2006-2013 ASIX Electronics Corporation. All rights reserved. 2.6 Standard Printer Port (SPP) Interface Pins Group (Optional) SIGNAL TYPE PIN NO. DESCRIPTION PD[7:5] PD[4:0] I/O/PD I/O/PU 102 – 100 99 – 95 Parallel Data: The bi-directional parallel data bus is used to transfer information between CPU and peripherals. Default serve as input, using /DOE bit of register offset x1Ah to set the direction. BUSY I/PU 108 Busy: This is a status input from the printer, high indicating that the printer is not ready to receive new data. /ACK I/PU 107 Acknowledge: A low active input from the printer indicating that it has received the data and is ready to accept new data. PE I/PU 106 Paper Empty: A status input from the printer, high indicating that the printer is out of paper. SLCT I/PU 103 Slect: This high active input from the printer indicating that it has power on. /ERR I/PU 113 Error: A low active input from the printer indicating that there is an error condition at the printer. /SLCTIN O 112 Slect In: This active low output selects the printer. /INIT O 111 Init: This signal is used to initiate the printer when low. /ATFD O 110 Auto Feed: This output goes low to cause the printer to automatically feed one line after each line is printed. /STRB O 109 Strobe: A low active pulse on this output is used to strobe the print data into the printer. TAB - 6 Standard Printer Port Interface pins group 2.7 General Purpose I/O Pins Group Signal Name Type Pin No. Description GPI[2]/SPD I/PU 113 Read register offset 17h bit 6 value reflects this input value. GPI[1]/DPX I/PU 106 When MII port is selected. Read register offset 17h bit 5 value reflects this input value. When SPP port is selected. The pin is defined as PE. GPI[0]/LINK I/PU 103 When MII port is selected. Read register offset 17h bit 4 value reflects this input value. When SPP port is selected. The pin is defined as SLCT. GPO[0] O 120 Default “1”. The pin reflects write register offset 17h bit 0 inverted value. TAB - 7 General Purposes I/O pins group |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |