TSL2585 datasheet(30/86 Pages) OSRAM

30 / 86 page

Datasheet, Public

Page 29

[v4-00] 2022-Dec-22

Document Feedback

TSL2585 − Register Overview

Device Identification Registers

Figure 32:

Device Identification

Note(s):

1. Return to the Register Map (0x90, 0x91, 0x92).

STATUS Register

Figure 33:

STATUS

Addr

Bit

Field

Reset

Type

Description

0x90

3:0

AUX_ID

0110b

Device Identification

AUX_ID: Identifies package and wafer factory.

REV_ID: Identifies function ID and revision

number of CMOS die.

ID: Device identification

0x91

7:0

REV_ID

0x11

00010001b

0x92

7:0

0x5C

01011100b

Addr: 0x93

STATUS

Bit

Field

Reset

Type

Bit Description

7MINT

R/W

Modulator Interrupt. Indicates that a modulator interrupt

has occurred because of saturation. Check the STATUS2

saturation. Writing 1 to this bit clear MINT and all

subsequent interrupts.

6:4

Reserved

3AINT

R/W

ALS Interrupt. If AIEN is set, this interrupt indicates that an

ALS event that met the programmed ALS thresholds (AILT or

AIHT) and persistence (APERS) occurred. Check the STATUS3

all subsequent interrupts.

2FINT

R/W

FIFO Interrupt. Indicates that the data level in the FIFO met

the programmed FIFO thresholds (FIFO_LVL and FIFO_THR).

This interrupt is automatically asserted/removed depending

on the programmed FIFO thresholds. Writing 1 to this bit

clears FINT. The interrupt, however, will be promptly

asserted again in case the FIFO has not been read out or

cleared.

TSL2585 датащи(PDF) 30 Page - OSRAM GmbH

TSL2585 датащи(HTML) 30 Page - OSRAM GmbH

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86

датащи скачать

ссылки URL