M700000002 datasheet(108/128 Pages) SPANSION

108 / 128 page

106

Am70PDL127BDH/Am70PDL129BDH

November 25, 2003

AD VAN C E

INFORM ATION

ABSOLUTE MAXIMUM RATINGS

Storage Temperature

Plastic Packages . . . . . . . . . . . . . . . –65

°C to +150°C

Ambient Temperature

with Power Applied. . . . . . . . . . . . . . –65

°C to +125°C

Voltage with Respect to Ground

CC (Note 1) . . . . . . . . . . . . . . . . . –0.5 V to +4.0 V

IO . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to +4.0 V

A9, OE#, ACC, and RESET#

(Note 2) . . . . . . . . . . . . . . . . . . . . –0.5 V to +12.5 V

All other pins (Note 1) . . . . . . –0.5 V to V

CC +0.5 V

Output Short Circuit Current (Note 3) . . . . . . 200 mA

Notes:

1. Minimum DC voltage on input or I/O pins is –0.5 V.

Dur ing voltage transitions, input or I/O pins may

overshoot VSS to –2.0 V for periods of up to 20 ns.

Maximum DC voltage on input or I/O pins is V

CC +0.5 V.

See Figure 10. During voltage transitions, input or I/O

pins may overshoot to VCC +2.0 V for periods up to 20 ns.

See Figure 11.

2. Minimum DC input voltage on pins A9, OE#, ACC, and

RESET# is –0.5 V. During voltage transitions, A9, OE#,

ACC, and RESET# may overshoot V

SS to –2.0 V for

periods of up to 20 ns. See Figure 10. Maximum DC

input voltage on pin A9, OE#, ACC, and RESET# is

+12.5 V which may overshoot to +14.0 V for periods up

to 20 ns.

3. No more than one output may be shorted to ground at a

time. Duration of the short circuit should not be greater

than one second.

Stresses above those listed under “Absolute Maximum

Ratings” may cause permanent damage to the device. This

is a stress rating only; functional operation of the device at

these or any other conditions above those indicated in the

operational sections of this data sheet is not implied.

Exposure of the device to absolute maximum rating

conditions for extended periods may affect device reliability.

OPERATING RANGES

Industrial (I) Devices

Ambient Temperature (T

A) . . . . . . . . . –40°C to +85°C

Supply Voltages

CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7–3.3 V

IO (Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . 2.7–3.3 V

Notes:

1. Operating ranges define those limits between which the

functionality of the device is guaranteed.

2. See Ordering Information section for valid V

CC/VIO range

combinations. The I/Os will not operate at 3 V when V

IO =

1.8 V.

ESD

Spansion Flash MultiChip memory products are not

tested or guaranteed for any level of ESD immunity on

components not designed and manufactured by FASL

LLC. Please refer to individual MCP product qualifica-

tion reports for information on how to obtain ESD im-

munity infor mation from manufacturers of such

components.

20 ns

+0.8 V

–0.5 V

20 ns

–2.0 V

Figure 10.

Maximum Negative

Overshoot Waveform

20 ns

VCC

+2.0 V

+0.5 V

20 ns

2.0 V

Figure 11.

Maximum Positive

Overshoot Waveform

M700000002 датащи(PDF) 108 Page - SPANSION

M700000002 датащи(HTML) 108 Page - SPANSION

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL