M700000002 datasheet(90/128 Pages) SPANSION

90 / 128 page

Am70PDL127BDH/Am70PDL129BDH

November 25, 2003

AD VAN C E

INFORM ATION

Write Protect (WP#)

The Write Protect function provides a hardware

method of protecting the first or last sector without

using V

ID. Write Protect is one of two functions pro-

vided by the WP#/ACC input.

If the system asserts V

IL on the WP#/ACC pin, the de-

vice disables program and erase functions in the first

or last sector independently of whether those sectors

were protected or unprotected using the method de-

scribed in “Sector Group Protection and Unprotection”.

Note that if WP#/ACC is at V

IL when the device is in

the standby mode, the maximum input load current is

increased. See the table in “DC Characteristics”.

If the system asserts V

IH on the WP#/ACC pin, the de-

vice reverts to whether the first or last sector was pre-

viously set to be protected or unprotected using the

method described in “Sector Group Protection and

Unprotection”.

Note: No external pullup is necessary

since the WP#/ACC pin has internal pullup to V

CC.

Temporary Sector Group Unprotect

(Note: In this device, a sector group consists of four adjacent

sectors that are protected or unprotected at the same time

(see Table 4).

This feature allows temporary unprotection of previ-

ously protected sector groups to change data in-sys-

tem. The Sector Group Unprotect mode is activated by

setting the RESET# pin to V

ID. During this mode, for-

merly protected sector groups can be programmed or

erased by selecting the sector group addresses. Once

ID is removed from the RESET# pin, all the previously

protected sector groups are protected again. Figure 1

shows the algorithm, and Figure 23 shows the timing

diagrams, for this feature.

Figure 1.

Temporary Sector Group

Unprotect Operation

START

Perform Erase or

Program Operations

RESET# = V

Temporary Sector

Group Unprotect

Completed (Note 2)

RESET# = VID

(Note 1)

Notes:

1. All protected sector groups unprotected (If WP# = V

IL,

the first or last sector will remain protected).

2. All previously protected sector groups are protected

once again.

M700000002 датащи(PDF) 90 Page - SPANSION

M700000002 датащи(HTML) 90 Page - SPANSION

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL