MPF42791 datasheet(6/75 Pages) MPS

6 / 75 page

MPF42791 – 2 TO 16 BATTERY PACK FG W/ R DETECTION AND THERMAL MODEL

MPF42791 Rev. 1.0

MonolithicPower.com

9/19/2022

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ABSOLUTE MAXIMUM RATINGS (1)

VCC supply voltage (VCC) ........................... 3.6V

VDD supply voltage (VDD) ........................... 3.6V

nRST pin......................................-0.3V to +3.6V

All other pins ........................ -0.3V to VCC + 0.3V

Total power dissipation (TA = 25°C) (2)

…………………………………………….. 500mW

Storage temperature ................ -55°C to +150°C

Junction temperature ............... -55°C to +150°C

ESD Ratings

Human body model (HBM) .................... ±4000V

Recommended Operating Conditions (3)

Supply voltage (VDD) ..........................3V to 3.6V

All other pins ........................ -0.3V to VCC + 0.3V

Operating junction temp (TJ) ...... -40°C to +85°C

Thermal Resistance (4)

θJA

θJC

TQFN-32 (4mmx4mm)...........47

…...4.5…°C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature, TJ (MAX), the junction-to-

ambient thermal resistance,

JA, and the ambient temperature,

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX) - TA) / θJA. Exceeding the maximum allowable power

dissipation can produce an excessive die temperature, and the

regulator may go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

3) The device is not guaranteed to function outside of its operating

conditions.

4) Measured on JESD51-7, 4-layer PCB.

MPF42791 датащи(PDF) 6 Page - Monolithic Power Systems