CS5535 datasheet(379/555 Pages) NSC

379 / 555 page

Revision 0.8

379

www.national.com

UART/IR Controller Register Descriptions (Continued)

5.12.3.7

Modem Status Register (MSR)

The function of this register depends on the selected operational mode. When a UART mode is selected, this register pro-

vides the current state as well as state-change information of the status lines from the modem or data transmission module.

When any of the IR modes is selected, the register function is controlled by the setting of the IRMSSL bit of the IRCR2 (see

Section 5.12.8.2 on page 390). If IRMSSL is 0, the MSR register works as in UART mode. If IRMSSL is 1, the MSR returns

the value 30h, regardless of the state of the modem input lines.

When loopback is enabled, the MSR works similarly except that its status input signals are internally driven by appropriate

bits in the MCR since the modem input lines are internally disconnected. Refer to bits 1 to 0 in MCR extended mode or bits

3 to 0 in MCR non-extended mode (see Section 5.12.3.5 on page 376) and to the LOOP and ETDLBK bits at the EXCR1

(see Section 5.12.5.2 on page 383).

A Modem Status Event (MS_EV) is generated if the MS_IE bit in IER is enabled and any of bits 0, 1, 2, or 3 in this register

are set to 1.

Bits 0 to 3 are cleared to 0 as a result of any of the following events:

• A hardware reset occurs.

• The operational mode is changed and the IRMSSL bit is 0.

• The MSR register is read.

In the reset state, bits 4 to 7 are indeterminate as they reflect their corresponding signal levels at MSR_UART[x]_MOD.

I/O Offset

06h

Type

Reset Value

x0h

MSR (Modem Status Register) Register Map

DCD

DSR

CTS

DDCD

TERI

DDSR

DCTS

MSR (Modem Status Register) Bit Descriptions

Bit

Name

Description

DCD

Data Carrier Detect. This is the status of the MOD5 bit in MSR_UART[x]_MOD (see Sec-

tion 5.12.1.1 on page 363).

6RI

Ring Indicator. This is the status of the MOD7 bit in MSR_UART[x]_MOD (see Section

5.12.1.1 on page 363).

5DSR

Data Set Ready. This is the status of the MOD6 bit in MSR_UART[x]_MOD (see Section

5.12.1.1 on page 363).

4CTS

Clear To Send. This is the status of the MOD4 bit in MSR_UART[x]_MOD (see Section

5.12.1.1 on page 363).

DDCD

Delta Data Carrier Detect. This bit is the Delta Data Carrier Detect (DDCD) indicator.

When high, this bit indicates that the DCD input has changed state. Reading this register

causes this bit to be cleared.

2TERI

Trailing Edge Ring Indicator. This bit is the Trailing Edge Ring Indicator (TERI) detector.

When high, this bit indicates that the RI input has changed from a high to low state. Read-

ing this register causes this bit to be cleared.

DDSR

Delta Data Set Ready. This bit is the Delta Data Set Ready (DDSR) indicator. When high,

this bit indicates that the DSR input has changed state since the last time it was read by the

CPU. Reading this register causes this bit to be cleared.

DCTS

Delta Clear To Send. This bit is the Delta Clear To Send (DCTS) indicator. When high, this

bit indicates that the CTS input has changed state since the last time it was read by the

CPU. Reading this register causes this bit to be cleared.

CS5535 датащи(PDF) 379 Page - National Semiconductor (TI)

CS5535 датащи(HTML) 379 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL