SPC58ECX datasheet(145/153 Pages) STMICROELECTRONICS

145 / 153 page

DS11620 Rev 8

145/153

SPC584Cx, SPC58ECx

Revision history

152

04-Feb-2018

Features

: Added AEC-Q100 qualified and updated core name to “e200z420n3”

(was “

e200z4d”).

Chapter 3: Package pinouts and signal descriptions

Rephrased introduction sentence since the pinout excel file will no longer be

attached to the datasheet

Chapter 3: Electrical characteristics

: Reformated note from introduction

Table 3: Parameter classifications

: Updated the description of classification tag “T”

Section 4.3: Operating conditions

: Replaced reference to IO_definition excel file by

"the device pinout IO definition excel file"

Table 5: Operating conditions

– Removed note “Core voltage as ....”

– Added parameter IINJ2

– Removed parameter “VRAMP_LV”

– Updated the table footnote “Positive and negative Dynamic current....” for all

Chorus devices

Table 6: PRAM wait states configuration

: Renamed the “Wait State configuration”

table to “PRAM wait state configuration”

Table 8: Device consumption

“IDD_LKG” and “IDD_LV”: Added footnote “IDD_LKG and IDD_LV are reported as...”

Updated: IDD_LKG, IDDSTBY8 and IDDSTBY256 for all conditions

Updated some typical values for IDDSTBY8 and IDDSTBY256

Replaced all references to the IO_definitions excel file by “the device pinout IO

definition excel file

Table 10: I/O pad specification descriptions

: Changed “the CMOS threshold” by

“(VDD_HV_IO_MAIN / 2) +/-20%” at Standby pads type

Table 15: STRONG/FAST I/O output characteristics

: updated values for tTR_S for

condition CL = 25 pF and CL = 50 pF

Table 16: VERY STRONG/VERY FAST I/O output characteristics

–“tTR20-80” replaced by “tTR20-8_V”

–“tTRTTL” replaced by “tTRTTL_V”

–“

ΣtTR20-80” replaced by “ΣtTR20-80_V”

Table 18: Reset PAD electrical characteristics

: replaced reference to IO_definition

excel file by "Refer to the device pinout IO definition excel file"

Table 20: PLL0 electrical characteristics

–

|ΔPLL0PHI0SPJ|: changed “T” by “D” and added pk-pk to Conditions value

–

|ΔPLL0PHI1SPJ|: added pk-pk to Conditions value

Table 20: PLL0 electrical characteristics

and Table 21: PLL1 electrical

characteristics

: Added “fINFIN”, Symbol “fINFIN”: changed “C” by “—” in column “C”

Table 82. Document revision history (continued)

Date

Revision

Changes

SPC58ECX датащи(PDF) 145 Page - STMicroelectronics

SPC58ECX датащи(HTML) 145 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL