SPC58ECX datasheet(143/153 Pages) STMICROELECTRONICS

143 / 153 page

DS11620 Rev 8

143/153

SPC584Cx, SPC58ECx

Revision history

152

24-Mar-2017

(cont’d)

Section 4.14: LFAST pad electrical characteristics

Table 32: LFAST PLL electrical characteristics

– Min and Max value of parameter “ERRREF” updated from “TBD” to “-1” and “+1”

respectively

– Max value of parameter “PN” updated from “TBD” to “-58”

– Frequency of parameter “

ΔPERREF” updated from “10MHz” to “20MHz”.

– Max value of parameter “

ΔPERREF” for condition “Single period” updated from

“TBD” to “350”

– Min and Max value of parameter “

ΔPERREF” for condition “Long period” updated

from “TBD” to “-500” and “+500” respectively.

Section 4.15: Power management

Table 33: Power management regulators

: Removed text “In parts packaged with

LQFP176, the auxiliary and clamp regulators cannot be enabled” from note 2.

Table 32: External components Integration

– For PMOS, replaced “STT4P3LLH6” with “PMPB100XPEA”

– For NMOS, replaced “STT6N3LLH6” with “PMPB55XNEA”

– Added table footnote to typ value of CS2.

– Removed table footnote “External components number.......”

Table 35: Linear regulator specifications

: Classification of parameter “IDDMREG”

changed from “T” to “P”.

Table 36: Auxiliary regulator specifications

: Classification of parameter “IDDAUX”

changed from “T” to “P”.

Table 38: Standby regulator specifications

: Classification of parameter “IDDSBY”

changed from “T” to “P”.

Figure 17: Voltage monitor threshold definition

: Updated the figure.

Table 39: Voltage monitor electrical characteristics

–For VPOR031_C, changed the max value from 0.85 to 0.97.

–For TVMFILTER, replaced T with D.

– Min value of “VPOR200_C” updated from “1.96” to “1.80”

– Max value of “VPOR031_C” updated from “.85” “0.97”

– Min value of “VMVD270_SBY” updated from “2.71” to “2.68”

– Max value of “VMVD270_SBY” updated from “2.80” “2.84”

– Changed the min value of parameter VPOR200_C from “1.96” to “1.80”

– Changed the max value of parameter VPOR031_C from “0.85” to “0.97”

– Changed the condition of parameter TVMFILTER from “T” to “D”

Section 4.17: AC Specifications

Table 44: Nexus debug port timing

: Classification of parameters “tEVTIPW” and

“tEVTOPW” changed from “P” to “D”.

Table 46: DSPI channel frequency support

: Added column to show slower and

faster frequencies.

Table 49: DSPI CMOS slave timing — full duplex — normal and modified transfer

formats (MTFE = 0/1)

: Added column to show slower and faster frequencies.

Table 47: DSPI CMOS master classic timing (full duplex and output only) MTFE = 0,

CPHA = 0 or 1

: Changed the Min value of tSCK (very strong) from 33 to 59.

Table 82. Document revision history (continued)

Date

Revision

Changes

SPC58ECX датащи(PDF) 143 Page - STMicroelectronics

SPC58ECX датащи(HTML) 143 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL