TUSB6250 datasheet(68/124 Pages) TI

68 / 124 page

Miscellaneous and GPIO Configuration Registers

9−3

SLLS535A − January 2004

TUSB6250

9.2

PUPDSLCT_P2: GPIO Pullup and Pulldown Resistor Selection Register for Port 2

(XDATA at F08A)

The PUPDSLCT_P2 register allows the MCU to select either the pullup or pulldown resistors on the MCU

port 2 GPIO pins. To turn off both the pullup and pulldown resistors, the MCU has to configure the

corresponding bit in the PUPDPWDN_P2 register.

PUSEL [N] means the pullup/pulldown resistor selection for pin P2.N.

765

43210

RSV

PUSEL6

PUSEL5

PUSEL4

RSV

PUSEL0

R/O

R/W

R/O

R/W

BIT

NAME

RESET

FUNCTION

PUSEL0

Port 2 GPIO pin P2.0 pullup and pulldown resistor selection by the MCU.

S If the MCU sets this bit to 1, the pullup resistor is selected and the pulldown resistor is

deselected.

S If the MCU clears this bit to 0, the pulldown resistor is selected and the pullup resistor is

deselected.

The power-up default is the pullup resistor disabled and the pulldown resistor enabled for the P2.0

pin.

3−1

RSV

000b

Reserved

6−4

PUSEL [N]

(N = 4 to 6)

Port 2 GPIO pin P2.4–P2.6 pullup and pulldown resistor selection by the MCU.

S If the MCU sets this bit to 1, the pullup resistor is selected and the pulldown resistor is

deselected.

S If the MCU clears this bit to 0, the pulldown resistor is selected and the pullup resistor is

deselected.

The power-up default is the pullup resistor enabled and the pulldown resistor disabled for pins

P2.4–P2.6.

RSV

Reserved

TUSB6250 датащи(PDF) 68 Page - Texas Instruments

TUSB6250 датащи(HTML) 68 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL