SSD1306Z datasheet(45/65 Pages) ETC2

номер детали	SSD1306Z

подробное описание детали	128 x 64 Dot Matrix OLED/PLED Segment/Common Driver with Controller

PDF	65 Pages

Scroll/Zoom	100%

производитель	ETC2 [List of Unclassifed Manufacturers]

домашняя страница

Logo

45 / 65 page

SSD1306

Rev 1.1

P 45/59

Apr 2008

Solomon Systech

10.2.2 Continuous Vertical and Horizontal Scroll Setup (29h/2Ah)

This command consists of 6 consecutive bytes to set up the continuous vertical scroll parameters and

determines the scrolling start page, end page, scrolling speed and vertical scrolling offset.

The bytes B[2:0], C[2:0] and D[2:0] of command 29h/2Ah are for the setting of the continuous horizontal

scrolling. The byte E[5:0] is for the setting of the continuous vertical scrolling offset. All these bytes together

are for the setting of continuous diagonal (horizontal + vertical) scrolling. If the vertical scrolling offset byte

E[5:0] is set to zero, then only horizontal scrolling is performed (like command 26/27h).

Before issuing this command the scroll must be deactivated (2Eh). Otherwise, RAM content may be

corrupted. The following figure (Figure 10-10 ) show the example of using the continuous vertical and

horizontal scroll:

Figure 10-10 : Continuous Vertical and Horizontal scrolling setup example

SSD1306Z датащи(PDF) 45 Page - List of Unclassifed Manufacturers