ADM3055E/ADM3057E

Data Sheet

Rev. A | Page 8 of 24

REGULATORY INFORMATION

ADM3055E

See Table 11 and the Insulation Lifetime section for details regarding maximum working voltages for specific cross isolation waveforms

and insulation levels. The ADM3055E is approved or pending approval by the organizations listed in Table 5.

Table 5.

CSA (Pending)

CQC (Pending)

Recognized under 1577

Component Recognition

Approved under CSA Component

Acceptance Notice 5A

DIN V VDE V 0884-10

(VDE V 0884-10):2006-12

Certified under

CQC11-471543-2012

Single Protection, 5000 V rms

Isolation Voltage

CSA 60950-1-07+A1+A2 and

IEC 60950-1, second edition, +A1+A2

GB4943.1-2011: basic

insulation at 830 V rms

Reinforced insulation at

Reinforced insulation at 415 V rms

IEC 60601-1 Edition 3.1:

Basic insulation (1 MOPP), 519 V rms

Reinforced insulation (2 MOPP), 261V rms

CSA 61010-1-12 and IEC 61010-1 third

edition

Basic insulation at 300 V rms mains,

Reinforced insulation at 300 V rms mains,

File E214100

File 205078

File 2471900-4880-0001

File (pending)

1

In accordance with UL 1577, each ADM3055E is proof tested by applying an insulation test voltage ≥ 6000 V rms for 1 sec.

2

5 pC). The * marking branded on the component designates DIN V VDE V 0884-10 approval.