| поискавой системы для электроныых деталей |
|
CMV2000 датащи(PDF) 39 Page - ams AG |
|
|
|||||||||||||||||||||||||||||
CMV2000 датащи(HTML) 39 Page - ams AG |
|
39 / 64 page ![]() Reference: CMV2000-datasheet-v3.8 CMV2000 v3 Datasheet Page 38 of 63 © 2015 CMOSIS bvba 5.9 INTERNAL PLL 5.9.1 ENABLE PLL When using the internal PLL it is no longer required to input a high speed LVDS clock; the internal PLL will create it itself depending on the register settings and the master input clock. Default the internal PLL is used. You can bypass and disable the PLL with the following settings. Please note that when disabling the PLL, the LVDS clock input must be enabled for the sensor to operate and the LVDS receiver current must have a value greater than 0. Enable PLL Register name Register address Default value Description of the value Pll_enable 113[0] 1 0: disables the PLL, saving some power 1: enables the PLL Pll_bypass 115[0] 0 0: Use the internal PLL 1: Bypass the internal PLL, use when disabling PLL LVDS clock input enable 82[2] 0 0: disables the LVDS clock input 1: enables the LVDS clock input, use when disabling PLL i_lvds_rec 74[3:0] 8 0: disables current for LVDS receiver 1-15: increases the current for the LVDS receiver, use when disabling PLL 5.9.2 DATA RATE During start-up or after a sequencer reset, the data rate can be changed if a lower speed than 480Mbps is desired. This can be done by applying a lower master input clock (CLK_IN) to the sensor and uploading a new value in the PLL registers. See section 3.5 for more details on the input clock. See section 3.7 and 3.8 for details on how and when the data rate can be changed. PLL range CLK_IN range [MHz] PLL_range PLL_OUT_FRE PLL_IN_FRE From – To 116[7] 116[6:4] 114[1:0] 30 - 48 1 5 0 20 - 30 0 1 0 15 - 20 1 1 1 10 - 15 0 2 1 7.5 - 10 1 2 3 5 - 7.5 0 0 3 5.10 10-BIT OR 12-BIT MODE The CMV2000 has the possibility to send 12 bits or 10 bits per pixel. The end user can select the desired resolution by programming the corresponding sequencer register. 10-bit or 12-bit mode Register name Register address Default value Description of the value Bit_mode 111[0] 1 0: 12 bits per pixel 1: 10 bits per pixel ADC_Resolution 112[1:0] 0 0: 10 bits per pixel 1: 11 bits per pixel 2: 12 bits per pixel PLL_load 117[7:0] 8 10 bit: set to 8 12 bit: set to 4 PLL_div 116[3:0] 9 10 bit: set to 9 12 bit: set to 11 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |